Shop by Model

CMMG Lower Parts Kit, AR15 - 55CA6C5Easy Color Coded Installation Plus Online Video Instructions- The color coded CMMG Lower Parts Kit includes everything you need for your next lower receiver project. They're all premium grade parts that meet or exceed...

.22 LR Conversion Kit for Your .223/5.56 AR15- Simply replace your .223/5.56 bolt carrier group with this .22 LR Bolt Group and turn your AR15 into a .22LR. Now you can practice, plink, or hunt with inexpensive .22LR ammo. Works with all milspec AR15...

.22 LR Conversion Kit for Your .223/5.56 AR15- Simply replace your .223/5.56 bolt carrier group with this .22 LR Bolt Group and turn your AR15 into a .22LR. Now you can practice, plink, or hunt with inexpensive .22LR ammo. Works with all milspec AR15...

.22 LR Conversion Kit for Your .223/5.56 AR15- Simply replace your .223/5.56 bolt carrier group with this .22 LR Bolt Group and turn your AR15 into a .22LR. Now you can practice, plink, or hunt with inexpensive .22LR ammo. Works with all milspec AR15...

Mark IV™, Mark III™ & 22/45™ Picatinny Rail Factory 1913 style picatinny rail for Mark IV™, Mark III™ and 22/45™. Rail fits firearms with factory pre-drilled receivers. Includes three screws. (Does not fit Mark I and Mark II™ pistols.) Genuine...

Extended Bolt Release for Ruger MK IV (Not 22/45)This part gives a larger, grippier surface for your thumb to engage the Ruger Mark IV bolt release. Releasing the bolt after a magazine change takes less effort and becomes more natural. It's especially...

Volquartsen VC4LLV-4 Competition Upper 4.5'' fits Ruger MKIV and MKIV 22/45- This replacement barrel ("upper") is a superb upgrade for your Ruger MK IV. It's extremely lightweight, well-balanced, and offers match grade accuracy. The Volquartsen Black...

T/C Encore and Pro Hunter Barrel Pivot Hinge PinsThis barrel hinge pin is a direct replacement for the Thompson Center Encore and Pro Hunter hinge pins.  Made from precision ground "drill rod" to fit closely for accuracy while allowing removal to...

Encore Grip Bolt Set- the shorter 1.5” bolt fits MOST synthetic buttstocks, while the longer 2” bolt fits MOST laminate and wood buttstocks, but some laminates/wood need the shorter, and vice versa with synthetic. One of them will fit to...

TC Encore/Contender Barrel Locking Bolt Spring- This is the coil spring that powers the Locking Bolts in the barrel underlug of Thompson Center Encore Pro Hunter and Contender. The locking bolts are compressed against this spring when you squeeze the...

T/C Extractor Leaf Spring by EABCOThis is the little leaf spring that fits against the bottom of rimless extractors on Thompson Center accessory barrels. Rimless cartridges such as 223 Remington or 308 Winchester have a special extractor that flexes...

T/C Contender 45-70 Extractors are Tool Steel by EABCOThese 45-70 extractors are used for TC Contender and G2 Contender barrels that are chambered for the 45-70 Government cartridge. Our extractors are precision machined from tool steel forging. We...

T/C Contender 44 Magnum Extractors are Tool Steel by EABCOThese 44 Magnum extractors are used for TC Contender and G2 Contender barrels that are chambered for the 44 Remington Magnum (44 Mag) cartridge. Our extractors are precision machined from tool...

T/C Contender 30-30 Winchester Extractors are Tool Steel by EABCOThese 30-30 Winchester extractors are used for TC Contender and G2 Contender barrels that are chambered for the 30-30 Winchester cartridge. Our extractors are precision machined from tool...

T/C Contender 22 Magnum Extractors are Tool Steel by EABCOThese 22 Magnum extractors are used for TC Contender and G2 Contender barrels that are chambered for the 22 Winchester Magnum Rimfire (22 WMR) cartridge. Our extractors are precision machined from...

T/C Contender 22 LR Extractors are Tool Steel by EABCOThese 22 LR extractors are used for TC Contender and G2 Contender barrels that are chambered for the 22 LR cartridge. Our extractors are precision machined from tool steel forging. We install these...

TC Contender Underlug Roll Pin Kit- Replacements for the roll pins used in the underlug assembly of Thompson Center Contender and G2 Contender barrels. Includes 6 large and 3 small pins to fit both TC factory barrels and EABCO Accuracy Barrels.

Legacy Magazine fits Remington 700 SA Detachable Mag Kit 5 Rounds- These magazines fit Remington 700 rifles that are converted to detachable magazine with the Legacy Sports Detachable Mag Kit. Sometimes referred to as "ammoboost" mags. These magazines...

350 Legend Stainless TC Encore Accuracy Barrels® by EABCO Twist 1:14, Standard Model, Match Grade Barrels Ready Made We bring considerable experience to the making of our 350 Legend barrels. It all started with the 357 Super Mag from Handgun Metallic...

Pac-Lite IV Barrel fits Ruger MKIV and MKIV 22/45, Fluted, 6"Weighing in at only 8.6 ounces, the aluminum Pac-Lite barrels are a favorite among many shooters.  With a reputation for accuracy, these TacSol barrels are lightweight and the best choice...