TC Encore Pro Hunter Headspace Shims

TC Encore Pro Hunter Headspace Shims

Headspace is the distance from head of a cartridge to the breech face. You can fine tune the headspace of your Encore or Pro Hunter with these "shims". The SAAMI specified headspace allows up to .010" of variance in the headspace of most cartridges. Being an off-the-shelf change barrel firearm system, the TC Encore and Pro Hunter hold remarkably close tolerances and most frame/barrel combinations are headspaced within the SAAMI specs. BUT... Some are closer or looser than others. This is where the Bellm headspace shims can help.

These shims come in a set of 6 thicknesses which you can use individually or stack as needed. They install in the back of the Firing Pin Bushing of your Encore/Pro Hunter and simply tighten the headspace. You don't want to go too tight. But if you're frame/barrel combination is headspacing on the loose side, closing it up a little will definitely improve your accuracy, function, and brass life (if you're reloading). The package comes with instructions and diagram for how to measure your headspace and how to install the shims. Here Are More Details...

• Fits TC Encore and Pro Hunter Frames
  
• Does NOT Fit G1 nor G2 Contender, nor SSK-50 (We have Different Shims for that)

E. Arthur Brown Company, Inc
4088 County Road 40 NW, Garfield, MN 56332