YoDave CZ-457 Trigger Spring Kit

YoDave CZ-457 Trigger Spring Kit 

With this kit, you can reduce the CZ-457 trigger pull to approximately half of what the factory spring will adjust down to. Used in conjunction with the sear adjustment screw located on the front of the trigger blade you can now get your trigger pull safely down to under 1 pound, or of course adjust it back up to the 2.5 pound range. Included with the spring is a bench block support to aid in removing the trigger pivot pin. A light dab of grease will hold the YoDave replacement spring in place while you reinstall the trigger blade into the trigger housing.

• Bench Block Included - Makes it easy to punch out the trigger pivot pin without removing the whole trigger module from the rifle.
• Trigger Spring Included - Reduces trigger pull to approximately half the lowest possible with the CZ factory trigger spring. In our EABCO test gun, the YoDave spring got the trigger pull down to 1 lb (It was 2.5 lb with the factory spring)
  
• Instructions - See the YoDave Instructions photo above.
  
• Fine Tuning - See the CZ factory video above on how to adjust the CZ-457 Trigger.
  

E. Arthur Brown Company, Inc
4088 County Road 40 NW, Garfield, MN 56332