Ammo

Hornady 17 Hornet 20gr V-Max Ammunition- 25rndsBased on the 22 Hornet cartridge case, the 17 Hornet propels the 20 gr V-MAX at 3,650 fps. Fueled with Superformance propellent, the 17 Hornet Superformance Varmint is economically priced, and delivers the...

Hornady 6.5mm ELD Seating Stem for 6.5mm BRM Seating Die  High BC, Very Low Drag (VLD) 6.5mm bullets are sometimes long enough to bottom out in a standard cavity seating stem. And the result can affect the alignment or run-out of your ammunition...

Storage box holds up to 15 bushings for Redding S-Type and Competition sizer dies. Fits regular heat treated steel bushings as well as TiN bushings. Bushings not included.  Be sure to visit our Redding Home Page for great reloading dies, tools, and...

  This is a Redding Category III Competition seating die (Save $65) for reloading the 6.5x47 Lapua cartridge.

Hornady 204 Ruger Loaded Ammunition - 20 roundsHornady 204 Ruger ammunition, box of 20 cartridges with 40 gr. bullets. Hornday's V-MAX bullets consistently achieve rapid fragmentation at all practical varmint shooting velocities. The cartridge is hand...

The Match-Grade Model 3BR was created to be the ultimate powder measure out of the box match ready! Since its creation this powder measure has been helping Silhouette shooters and Benchrest shooters win matches and set new records. It all started with...

Winchester Brand Brass in 204 Ruger, 100 pieces.Winchester makes the highest quality ammunition components available to the re-loader.  Each and every component from brass, powder, primers, and bullets, to wads and shot is made to meet and exceed...

Hornady 204 Ruger Ammunition- 20 RoundsHornady 204 Ruger ammunition, box of 20 cartridges with 32 gr. bullets. Ammunition is not returnable. **Loaded Ammunition must ship ground**Purchasers must be at least 21 years old**

Redding Optional Slide Bar Priming System for T7 Reloading and Big Boss Presses. Eliminates handling of primers during sizing, and speeds-up reloading operations. Comes complete with individualized tubes for both large and small primers. Capacity:...

  3BR Handgun Metering Chamber that dispenses from 0-10 grains if you are loading for handgun or small charges.

Redding .375 Winchester Reloading Dies Redding Reloading Dies Standard 3-Die Set includes full length sizer/decapper die and Seater/Crimper Die.  

M3 Handgun Metering Chamber that dispenses from 0-10 grains if you are loading for handgun or small cartridges. Fits ONLY Model 3 Measures

  Redding's No.5 Trickler makes it easy to dispense as little as a granule at a time into the weighing pan. Turn the knob and you add powder to the scale pan a granule or two at a time. Brings underweight charges up to accurate readings fast...

 The original Redding Model 3, time proven for accuracy and reliability. It has a micrometer metering chamber right in front for easy setting and reading. The micrometer makes it is possible to record your favorite settings and return to the same...

  Designed and manufactured with the utmost attention to accuracy and sensitivity standards. The Model 2 scale includes a magnetic dampened beam swing for extra fast readings plus, hardened and ground knife edges ride in precision milled stainless...

Sabot Neck Flaring DieThis is actually a Lee Neck Flaring Die. It makes seating saboted bullets into case mouths smoother, and less likely to damage the heel of the sabot. Run your cases into this die, then load with your saboted bullets using your...

Redding 22 ARC Type S Bushing Die FL Sizer uses the same interchangeable bushings (.001" increments) as those used in our bushing style neck sizing dies. Adjustable decapping rod allows you to adjust the bushing position, sizing only part of the neck...

Redding Full Length Sizer 2-Die SetRedding Series C 2-Die Reloading Set includes full length sizer/decapper die and Seater/Crimper Die. The full length die sets for bottleneck cases contain two dies. The full length (FL) resizing die contains a...

Redding 338 Rem UM C-II Type S Bushing Dies Neck Sizer Interchangeable Bushings Compensate for Differences in Cartridge Brass Thickness.   The amount of resizing provided by conventional reloading dies has  always been dictated by the...

Redding 7mm STW C-II Type S Bushing Dies Neck Sizer Interchangeable Bushings Compensate for Differences in Cartridge Brass Thickness.   The amount of resizing provided by conventional reloading dies has  always been dictated by the...