TC Encore Pro Hunter or Contender Trigger Job ServiceExpertly Performed by an Experienced, Skilled EABCO Gunsmith Sear Engagement Shortened - Reduces Trigger Movement Before The Shot Sear Engagement Polished - Gives Consistant, Predictable Feel, Shot...

PeepRib Peep Sights for Traditions Vortek and Pursuit Muzzleloaders  Our new PeepRib Aperture Sight for Traditions Vortek and Pursuit Muzzle Loaders combines a precision aperture sight with a scope mounting base. This Peeprib works with both...

  These kits take away the mystery of fine tuning the Ruger 10/22® action and result in a superb trigger pull and super fast lock time. The 10/22® Hammer Tune Kit produces a lighter trigger pull with a faster lock time. The sear engagement...

  Taco Hood for the Bond Front Sight used in handgun metallic silhouette competition. This is a 5" long tube that replaces the original short Bond hood-tube. Note: This is only the hood... It fits on your Bond Front Sight.

  The WGRS is an Aperture Sight that fits Thompson Center Arms Encore, Pro Hunter, Omega, and Impact. An aperture sight (aka peep sight), mounted as close to your eye as possible, removes a huge amount of aiming error by simply increasing the sight...

The Ruger 10/22® Competition Sear Kit lightens the trigger pull and smooths the trigger return. Hand stoned engagement surfaces. Includes a new sear, extra power sear spring, and two .004" trigger shims. This sear, when used with proper engagement of...

The 10/22® Hammer Tune Kit produces a lighter trigger pull with a faster lock time. The sear engagement surfaces are precision ground and vapor honed. The kit includes a new hammer, extra power hammer spring, two .004" shims and a new trigger return...

Ruger Mark IV Pistol Trigger Shims These trigger shims fit Ruger Mark I, II, III, IV & 22/45 Pistols. They install on the Left Side of the Trigger, between the Trigger and the #AN37 Bolt Stop Assembly. Installing a Shim here will stop the Trigger...

YoDave Marlin 336 Reduced Power Finger Lever Spring No more fighting to click the lever into the fire position on Marlin Model 1894, 1895, 336 and 444 models! Polishing the mating surfaces of the lever and the plunger as well as the addition of a reduced...

 YoDave Marlin 39A Reduced Power Hammer Spring Reduce the force required to open your lever and cycle the bolt by reducing the force of the spring acting on the hammer without sacrificing consistent primer strikes and ignition, ease of cycling is...

YoDave CZ-455 Trigger Shim and Spring KitImproves the Trigger Pull of CZ-455, CZ-452 and BRNO Model 2, 4, and 5 Rifles This kit removes the creep and lightens the trigger pull weight by the use of shims and new springs. Kit includes 4 shims and 4 new...

YoDave CZ-457 Trigger Spring Kit  With this kit, you can reduce the CZ-457 trigger pull to approximately half of what the factory spring will adjust down to. Used in conjunction with the sear adjustment screw located on the front of the trigger...

Volquartsen Target Sight Setsfor Original LLV and New MKIV LLV Uppers- Target Sights Set (Front and Rear) to fit Volquartsen LLV and LLV-4 Uppers. Includes Patridge Front Sight and Target Adjustable Rear Sight. Fits Volquartsen 6 inch LLV and LLV-4 and...

Bond Hooded Front Silhouette Sight by EABCO- Original Ralph Bond designed IHMSA Silhouette front sight manufactured by EABCO has a front post that's adjustable for width and height with a removable one inch tubular hood. This is the same sight that we...