SSK-50 Hammer Fits Original Contender and SSK-50 Receivers Fits SSK-50 firearm platforms May be compatible with TC Contender®, but due to their extreme dimensional variation, SSK cannot guarantee this. Please contact Smith & Wesson for...

Volquartsen HP Action Kit for 10/22  This kit consists of Volquartsen upgrade parts including: Target hammer (including shims and bushings), hammer spring, target disconnector, target sear and target trigger (including polished plunger and spring)...

Volquartsen Exact Edge Extractor for Remington 870 and 1100The Exact Edge Extractor is manufactured through an EDM process (not an inferior MIM process) to produce exacting tolerances. The new extractor will not lose its edge under impact like...

Harris Bipods #3 Adapter fits Remington 4, 74, 7400The #3 Bipod Adapter creates a solid swivel stud bipod mounting point on Remington semi-automatic rifles. Attaches at the end of the forend, replaces the forend screw. E. Arthur Brown Company, Inc4088...

Extended Bolt Release for Ruger MK IV (Not 22/45)This part gives a larger, grippier surface for your thumb to engage the Ruger Mark IV bolt release. Releasing the bolt after a magazine change takes less effort and becomes more natural. It's especially...

Thread Protector fits AR15 HBAR Contour 1/2 x 28 Stainless- Protect and beautify your HBAR muzzle threads with this beautiful knurled stainless thread protector. Standard 1/2 x 28 thread with a length of 5/8th inch and .740" diameter, it fits all EABCO...

Hybrid Match Ruger 10/22 BoltAccuracy Tuned and CNC Machined to Minimum TolerancesHybrid Match 10/22 Bolt combines the precision of CNC machining with accuracy enhancing parts and tune-up techniques. Drop-in fit... Just replace your bolt with this one...

  These kits take away the mystery of fine tuning the Ruger 10/22® action and result in a superb trigger pull and super fast lock time. The 10/22® Hammer Tune Kit produces a lighter trigger pull with a faster lock time. The sear engagement...

YoDave CZ-457 Plus 10 Striker Spring Achieve more reliable ignition when you install this 10% stronger striker spring in your CZ-457 bolt. Refer to your CZ-457 manual for disassembly and replacement of the factory spring. If you are experiencing...

Springs for the JARD CZ-457 Trigger Replacement springs to change pull weight on the JARD CZ-457 Trigger. These are the springs shown in the JARD CZ-457 Trigger instruction manual. You can swap in a stronger or a lighter spring to change the pull weight...

Remington 870 Trigger Tune Spring Kit This kit comprises of both a replacement hammer spring as well as five different trigger springs ranging in pull weight from 1.25lb to 5lb. The hammer spring is made from stainless steel, and the trigger springs are...