Parts and Tools

Ruger® 10/22® Mag Dropper™ II Magazine Release SilverNew and Improved Version II Mag Dropper literally DROPs Ruger 10/22 Magazines with the press of your trigger finger or thumb. Magazines are easily released out of the magazine well when...

Encore Muzzle Loader Forend HardwareFor Factory Walnut and EABCO Laminate Muzzleloader Forends   All the hardware needed to attach the Encore Laminate or Factory Walnut Muzzle Loader forend. Includes the leaf spring rod retainer with screw, and...

Shotgun Forend Screws fit Laminated TC Encore Forends  - All the hardware needed to attach our EABCO laminated 20ga and 12ga shotgun forend to your TC Encore or Pro Hunter Shotgun barrel. This hardware includes the two special screws and washers.-To...

Blast Shield Mag Disconnect Replacementfor Ruger Mark IV and Mark IV 22/45 Pistols.- This little replacement part shields the sear and hammer from debris, improves magazine alignment, and allows your MKIV to fire whether or not the magazine is inserted...

Remington 870 Trigger Tune Spring Kit This kit comprises of both a replacement hammer spring as well as five different trigger springs ranging in pull weight from 1.25lb to 5lb. The hammer spring is made from stainless steel, and the trigger springs are...

Ruger 10/22 Rifle Performance Pak - Springs Extra Power Recoil Spring Extra Power Hammer Spring Extra Power Trigger Spring Reduced Power Sear Spring Upgrading your Ruger 10/22 with these springs will improve let-off and overall functioning. It is...

AR-15 Ambidextrous Charging Handle Black A very nice ambidextrous charging handle at an affordable price. Lightweight anodized black aluminum. E. Arthur Brown Company, Inc 4088 County Road 40 NW, Garfield, MN 56332

This is a .936" diameter Low Profile Gas Block designed to accommodate the larger barrel, yet fit under most handguards. Features: .936 diameter Low Profile Height: 1.43" 4150 Steel Construction Non-reflective, Matte Black finish Includes roll pin, 2...

Master Trigger Lock fits Most Rifles, Shotguns, and Handguns- The Master Lock No. 90KADSPT Keyed Trigger Lock features a steel and zinc body for maximum durability. The protective rubber pads protect gun’s finish from marring or scratching. The Limited...

DPMS COMPATIBLEAR-10/LR-308 Tactical Charging Handle This is our standard AR-10/LR-308 Charging Handle Assembly. Features: Mil-Spec 6061-T6 Aircraft Aluminum Black Finish Smooth Operation under Extreme Conditions Fits: AR-10/LR308 DPMS Compatible E...

Choate Long Bipod Lug Sliding lug with swivel stud and locking wing nut fits the accessory rail on the bottom of the forend of Choate Sniper and Varmint Stock. Solid and handy swivel stud mounting point for Harris bipods. Wing nut allows you to unlock,...

Choate Short Bipod Adaptor/Swivel Stud  A shorter, lower bipod adapter that fits the forend rail of our Sniper, Varmint and Tactical stocks, lets you install a Harris bipod so that it tightens against the forend so there is not side to side movement...

Thread Protector AR-10 Heavy Profile 5/8X24 Stainless- Protect and beautify your Heavy Profile AR-10 muzzle threads with this beautiful knurled stainless thread protector. Standard 5/8X24 thread with a length of .625 inch and .930" diameter, it fits...

YoDave CZ-457 Plus 10 Striker Spring Achieve more reliable ignition when you install this 10% stronger striker spring in your CZ-457 bolt. Refer to your CZ-457 manual for disassembly and replacement of the factory spring. If you are experiencing...

Volquartsen SureFeed Follower Springs for Ruger MKIV Magazines- The SureFeed Magazine Follower Spring for the Ruger MK IV is 25% stronger than the factory spring. The increased spring rate improves feeding in all Ruger MK IV magazines. The SureFeed...

Springs for the JARD CZ-457 Trigger Replacement springs to change pull weight on the JARD CZ-457 Trigger. These are the springs shown in the JARD CZ-457 Trigger instruction manual. You can swap in a stronger or a lighter spring to change the pull weight...

Adjustable Ruger 10/22 Guide Rod *Additional Spring and C-Clip Retainer Sold Separately - Select Above* Heavy Duty Spring and C-Clipped Rod Allow Custom Spring Tension  Taking the Ruger 10/22 Bolt Spring and Guide Rod up a notch in precision, the...

A Standard AR-15 Charging Handle. Mil-Spec 6061-T6 Aircraft Aluminum Smooth Operation under Extreme Conditions Black Finish Fits: AR-15 E. Arthur Brown Company, Inc 4088 County Road 40 NW, Garfield, MN 56332

Thread Protector, 1/2x28, .820 Dia., Stainless, Knurled A stainless knurled thread protector to protect and beautify the threaded muzzle of your barrel. Recessed threads on the back side assure a tight and seamless fit. Beautifully knurled for handy...