Shop by Model

YoDave CZ-457 Plus 10 Striker Spring Achieve more reliable ignition when you install this 10% stronger striker spring in your CZ-457 bolt. Refer to your CZ-457 manual for disassembly and replacement of the factory spring. If you are experiencing...

Springs for the JARD CZ-457 Trigger Replacement springs to change pull weight on the JARD CZ-457 Trigger. These are the springs shown in the JARD CZ-457 Trigger instruction manual. You can swap in a stronger or a lighter spring to change the pull weight...

YoDave CZ-457 Trigger Spring Kit  With this kit, you can reduce the CZ-457 trigger pull to approximately half of what the factory spring will adjust down to. Used in conjunction with the sear adjustment screw located on the front of the trigger...

T/C Omega/Encore 209 Breech PlugDirect Replacement for the Original TC 7763 Breech Plug Fits Original 209x50 Encore and Omega Muzzleloaders Does NOT fit Pro Hunter, Endeavor, FX, nor Speed Breech Uses Standard 209 Primers If you've been looking for a...

Thread Protector, 1/2x28, .820 Dia., Stainless, Knurled A stainless knurled thread protector to protect and beautify the threaded muzzle of your barrel. Recessed threads on the back side assure a tight and seamless fit. Beautifully knurled for handy...

6.8 Rem SPC AR15 Bolt Carrier Group Shot Peened Black Nitride Finish w/No Logo Fits 6.8 Rem SPC, 400 Legend, 224 Valkyrie, etc.    Precision machined complete BCG (Bolt Carrier Group) with Black Nitride finish for excellent durability and...

Thompson CenterG1 Contender and SSK-50 Pistol Grip Composite pistol grip fits the original G1 Contender as well as the new SSK-50 frames. Comfortable ambidextrous shape with finger grooves and palm swell. Two part construction features hard plastic front...

These Pro Hunter screws (two long screws 0.785") with washers work on the Pro Hunter (Flex Tech) Rifle Forends. New Flex Tech forends already include these screws and washers so, if you are ordering a new forend, you do not need to order these screws. We...

Black Nitride AR15 Bolt Carrier Group Shot Peened Black Nitride Finish w/No Logo Fits 223 Rem, 5.56 NATO, 300 Blackout, 350 Legend, etc.    Precision machined complete BCG (Bolt Carrier Group) with Black Nitride finish for the excellent...

This is a .936" diameter Low Profile Gas Block designed to accommodate the larger barrel, yet fit under most handguards. Features: .936 diameter Low Profile Height: 1.43" 4150 Steel Construction Non-reflective, Matte Black finish Includes roll pin, 2...

This is a standard AR-15 Micro Sized Gas Block. Designed with the minimum profile to fit under nearly any handguard system, it snugly fits standard .750 diameter barrels. Has a shallow "cut" mark in the front face for those who want to do witness marking...

AR-15 Ambidextrous Charging Handle Black A very nice ambidextrous charging handle at an affordable price. Lightweight anodized black aluminum. E. Arthur Brown Company, Inc 4088 County Road 40 NW, Garfield, MN 56332

A Standard AR-15 Charging Handle. Mil-Spec 6061-T6 Aircraft Aluminum Smooth Operation under Extreme Conditions Black Finish Fits: AR-15 E. Arthur Brown Company, Inc 4088 County Road 40 NW, Garfield, MN 56332

Nickel Boron AR15 Bolt Carrier Group Shot Peened Nickel Boron Finish w/No Logo Fits 223, 5.56, 350 Legend, 300 Blackout, etc.    Precision machined complete BCG (Bolt Carrier Group) with Nickel Boron finish for the best lubricity, function,...

KAK Crush Washer 9/16x24 fits AR15 350 Legend - Often, 350 Legend Barrels are threaded 9/16x24 to avoid mounting a 22 or 30 caliber brake.- Our KAK Crush Washer 9/16x24 allows DIY-ers to time their muzzle treatments onto their threaded barrels.9/16 x...

The Titan Extended Magazine Release for Ruger® Mark IV™ 22/45™ is a simple, drop-in replacement for the smaller factory magazine release, and offers significantly more surface area and height to boost the consistency and speed of magazine...

"Get a Grip Kit" for Ruger® MKIV™ 22/45™The “Get a Grip” Kit includes the TANDEMKROSS “Cornerstone” Safety Thumb Ledge, TANDEMKROSS “hiveGrip” and Striplin Custom Gunworks forward thumb ledge in one, easy-to-install kit.The “Cornerstone” Safety Thumb...

Apertures for TechSights 200  These new one-piece apertures for the TechSights 200 peep sight allow you to change peep-hole sizes to suit the available light where you're shooting. It works much like a camera aperture in that, the smaller the hole,...

MDT AICS Remington 700 SA Bottom MetalAdd AICS detachable magazine compatibility to your Remington 700 short action (SA)! Fits Stocks with Badger M5 Bottom Metal Inlet Adjustable Mag Latch seats AICS magazines perfectly Flared Magwell for Fast Mag...

Scorpion LLV Compensator A unique pistol comp designed for Scorpion Pistols and their Scorpion LLV barrels. CNC-machined from billet material to match the upper profile and then finished to match. A captive, knurled nut secures the compensator to the...