Shop by Model

YoDave Marlin 336 Reduced Power Finger Lever Spring No more fighting to click the lever into the fire position on Marlin Model 1894, 1895, 336 and 444 models! Polishing the mating surfaces of the lever and the plunger as well as the addition of a reduced...

 YoDave Marlin 39A Reduced Power Hammer Spring Reduce the force required to open your lever and cycle the bolt by reducing the force of the spring acting on the hammer without sacrificing consistent primer strikes and ignition, ease of cycling is...

 YoDave CZ-452 Plus 10 Striker Spring Upgrade your worn or weak CZ-452 striker spring with this new 10 percent heavier striking spring for a more consistent primer strike and ignition. Also fits 453, 455, and 513 models. All benchrest...

YoDave CZ-455 Trigger Shim and Spring KitImproves the Trigger Pull of CZ-455, CZ-452 and BRNO Model 2, 4, and 5 Rifles This kit removes the creep and lightens the trigger pull weight by the use of shims and new springs. Kit includes 4 shims and 4 new...

DURAMAG SS 400 LEGEND Magazine - 10 Rnds A Legendary caliber deserves a legendary magazine and the 400 Legend Duramag SS delivers the only purpose built magazine for this caliber. With these Duramag SS mags you’re getting 400 Legend specific rib...

DURAMAG SS 400 LEGEND Magazine - 5 Rnds A Legendary caliber deserves a legendary magazine and the 400 Legend Duramag SS delivers the only purpose built magazine for this caliber. With these Duramag SS mags you’re getting 400 Legend specific rib...

Blue TC Encore Accuracy Barrels® by EABCO400 Legend 1:16, 1:16 Standard Model, Match Grade BarrelTC Encore Accuracy Barrels® fit the TC Encore and Pro Hunter frames. Manufactured by E. Arthur Brown Company with special attention to detail,...

Blue TC Encore Accuracy Barrels® by EABCO 360 Buckhammer 1:12, Standard Model, Match Grade Barrel TC Encore Accuracy Barrels® fit the TC Encore and Pro Hunter frames. Manufactured by E. Arthur Brown Company with special attention to detail,...

Hawkins M5 Bottom MetalFits Remington 700 Long Action Hawkins M5 Bottom Metal accepts AICS magazines is designed to fit into Remington 700 stocks with an M5 inlet. These will not drop into a standard BDL inlet (hinged floorplate)! The M5 inlet is larger...

Woox Merica Precision Chassis Stock - Tigerwood  The Merica bolt-action chassis stock from WOOX encompasses the classic look and feel of wood with the advantages of modern chassis technology. Features Include: Handcrafted in Italy from Laminated...

TC G1 Contender/SSK-50 Composite Buttstock - Full length Montecarlo styled buttstock fits original G1 Contender and SSK-50 frames (Does NOT fit the G2). Rigid and weatherproof composite construction with pistol grip and Limbsaver recoil pad. Includes...

Timney 517-16V2 Straight Triggers for Remington 700Replacement of Trigger and Safety System, Adjustable 2-4 lb. (Factory set at 3lbs) Nickel Plated- The "Straight" Timney Triggers for your Remington 700 will give you a perfect trigger pull for your best...

ORYX Chassis Stock fits Remington 700 LA/RH - BLACK Mag Compatibility: 3.715" AICS magazines   aPlease check the size of your Long Action AICS Magazine...       (It's stamped right on it. Make sure it will...

ORYX Chassis Stock fits Savage Axis LA/RH - BLACK Chassis panels come in BLACK Weight: 4.2 lbs LOP: 13 - 13.5" (Additional LOP with our spacer kit) Material: 6061 Finish: MIL Spec Type III hard anodize Accepts Standard Grips (included) M-LOK pattern...

Volquartsen Mk IV and Mk IV 22/45 Competition Kit Also Converts Mk IV and Mk IV 22/45 Pistols to Eliminate the Magazine Disconnect   Trying to figure out which parts are needed to take the Ruger MKIV and 22/45 to the next level? Look no...

Volquartsen HP Action Kit for 10/22  This kit consists of Volquartsen upgrade parts including: Target hammer (including shims and bushings), hammer spring, target disconnector, target sear and target trigger (including polished plunger and spring)...

YoDave CZ-457 Plus 10 Striker Spring Achieve more reliable ignition when you install this 10% stronger striker spring in your CZ-457 bolt. Refer to your CZ-457 manual for disassembly and replacement of the factory spring. If you are experiencing...

Springs for the JARD CZ-457 Trigger Replacement springs to change pull weight on the JARD CZ-457 Trigger. These are the springs shown in the JARD CZ-457 Trigger instruction manual. You can swap in a stronger or a lighter spring to change the pull weight...

YoDave CZ-457 Trigger Spring Kit  With this kit, you can reduce the CZ-457 trigger pull to approximately half of what the factory spring will adjust down to. Used in conjunction with the sear adjustment screw located on the front of the trigger...

Thread Protector, 1/2x28, .820 Dia., Stainless, Knurled A stainless knurled thread protector to protect and beautify the threaded muzzle of your barrel. Recessed threads on the back side assure a tight and seamless fit. Beautifully knurled for handy...