Shop by Model

Savage Factory Magazines 4-Shot Short Action Matte Blued Finish Improved Latch System Compatible with:Savage AXISLightWeight HunterTrophy Hunter XP/10Trophy Hunter XP/11Lady Hunter/11Hunter XP/16Trophy Hunter XP/110Engage Hunter XP/11DOA Hunter...

Lever Gun Torx Screw KitsUpgrade Your Henry, Marlin, or Rossi Rifle For years the gun industry has used slot headed screws for the receivers on guns. Back in the day, tooling and fabrication what it was, it was about the only choice. These days we have...

TC Contender/Encore .45 Colt/.410 Ga. Choke Tube These are precision reproductions of the internal choke tube that fit rifled Thompson Center .45 Colt/.410 ga. shotgun pistol barrels. If you've lost your original 45-410 choke tube, this one will replace...

TriggerTech AR10 Diamond PVD Flat Trigger  1st Stage .25lbs | 2nd Stage 1.25-3.75 | Total 1.5 - 4.0 lbs* TriggerTech AR10 Triggers are built for top competitive shooters to offer the most accurate and dependable trigger on the market. Featuring...

YoDave Marlin 336 Reduced Power Finger Lever Spring No more fighting to click the lever into the fire position on Marlin Model 1894, 1895, 336 and 444 models! Polishing the mating surfaces of the lever and the plunger as well as the addition of a reduced...

 YoDave Marlin 39A Reduced Power Hammer Spring Reduce the force required to open your lever and cycle the bolt by reducing the force of the spring acting on the hammer without sacrificing consistent primer strikes and ignition, ease of cycling is...

 YoDave CZ-452 Plus 10 Striker Spring Upgrade your worn or weak CZ-452 striker spring with this new 10 percent heavier striking spring for a more consistent primer strike and ignition. Also fits 453, 455, and 513 models. All benchrest...

DURAMAG SS 400 LEGEND Magazine - 5 Rnds A Legendary caliber deserves a legendary magazine and the 400 Legend Duramag SS delivers the only purpose built magazine for this caliber. With these Duramag SS mags you’re getting 400 Legend specific rib...

Woox Merica Precision Chassis Stock - Tigerwood  The Merica bolt-action chassis stock from WOOX encompasses the classic look and feel of wood with the advantages of modern chassis technology. Features Include: Handcrafted in Italy from Laminated...

TC G1 Contender/SSK-50 Composite Buttstock - Full length Montecarlo styled buttstock fits original G1 Contender and SSK-50 frames (Does NOT fit the G2). Rigid and weatherproof composite construction with pistol grip and Limbsaver recoil pad. Includes...

Timney 517-16V2 Straight Triggers for Remington 700Replacement of Trigger and Safety System, Adjustable 2-4 lb. (Factory set at 3lbs) Nickel Plated- The "Straight" Timney Triggers for your Remington 700 will give you a perfect trigger pull for your best...

ORYX Chassis Stock fits Remington 700 LA/RH - BLACK Mag Compatibility: 3.715" AICS magazines   aPlease check the size of your Long Action AICS Magazine...       (It's stamped right on it. Make sure it will...

ORYX Chassis Stock fits Savage Axis LA/RH - BLACK Chassis panels come in BLACK Weight: 4.2 lbs LOP: 13 - 13.5" (Additional LOP with our spacer kit) Material: 6061 Finish: MIL Spec Type III hard anodize Accepts Standard Grips (included) M-LOK pattern...

Volquartsen HP Action Kit for 10/22  This kit consists of Volquartsen upgrade parts including: Target hammer (including shims and bushings), hammer spring, target disconnector, target sear and target trigger (including polished plunger and spring)...

YoDave CZ-457 Plus 10 Striker Spring Achieve more reliable ignition when you install this 10% stronger striker spring in your CZ-457 bolt. Refer to your CZ-457 manual for disassembly and replacement of the factory spring. If you are experiencing...

Springs for the JARD CZ-457 Trigger Replacement springs to change pull weight on the JARD CZ-457 Trigger. These are the springs shown in the JARD CZ-457 Trigger instruction manual. You can swap in a stronger or a lighter spring to change the pull weight...

YoDave CZ-457 Trigger Spring Kit  With this kit, you can reduce the CZ-457 trigger pull to approximately half of what the factory spring will adjust down to. Used in conjunction with the sear adjustment screw located on the front of the trigger...

Thread Protector, 1/2x28, .820 Dia., Stainless, Knurled A stainless knurled thread protector to protect and beautify the threaded muzzle of your barrel. Recessed threads on the back side assure a tight and seamless fit. Beautifully knurled for handy...

SSK-50 Frame, Lynx Sided The Original Contender/SSK-50® design is back in production, thanks to the SSK Firearms company. It has been a long time and a big challenge to re-tool for independent production of this classic single shot action. This new...

SSK-50 RECEIVER, Flat-Sided The SSK-50 Receiver is the modern revival of the original Contender design, now produced with advanced materials and precision manufacturing. This flat-sided stainless steel receiver is compatible with TC G1/G2 barrels, grips,...