Warne 20 MOA Tactical Scope Mounting BasesTrue Picatinny Mil-Spec Scope Mounting Bases are Tough and Accurate  Warne Maxima 20 MOA Tactical Scope Bases are all steel, rigid and accurate one piece scope mounting bases. These "20 MOA" bases have 20...

  These kits take away the mystery of fine tuning the Ruger 10/22® action and result in a superb trigger pull and super fast lock time. The 10/22® Hammer Tune Kit produces a lighter trigger pull with a faster lock time. The sear engagement...

Ruger 10/22 Accuracy Firing PinWider Impact Surface Disrupts the Rim Less, Improves Accuracy Potential  Firing pin impact plays a critical role in the accuracy of rimfire cartridges. For example, the Russians developed a 2-pin system that dominated...

  The WGRS is an Aperture Sight that fits Thompson Center Arms Encore, Pro Hunter, Omega, and Impact. An aperture sight (aka peep sight), mounted as close to your eye as possible, removes a huge amount of aiming error by simply increasing the sight...

DeltaPoint Pro Mount for SIG P220-229 Pistols!Solid Aluminum Mount also fits Tasco Optima 2000, JPoint, and Redfield DeltaPoint Pro Aluminum Mounting Kit for Sig P220, P225, P226, P228, P229, and P239.  Ergonomically designed to fit the contour of...

The Ruger 10/22® Competition Sear Kit lightens the trigger pull and smooths the trigger return. Hand stoned engagement surfaces. Includes a new sear, extra power sear spring, and two .004" trigger shims. This sear, when used with proper engagement of...

The 10/22® Hammer Tune Kit produces a lighter trigger pull with a faster lock time. The sear engagement surfaces are precision ground and vapor honed. The kit includes a new hammer, extra power hammer spring, two .004" shims and a new trigger return...

Turn your standard 10-round Ruger 10/22 magazines into a 3-Mag high capacity field unit with this TriMag 10/22 magazine Connector. The TriMag connects three factory Ruger 10/22 magazines into one "jungle clip" type unit. It's a very neat approach to...

TC Encore ProHunter Barrel 26" Stnls Fluted 360 Buckhammer Threaded TC Encore ProHunter barrels feature:  Finish Stainless Steel Length 26" Contour Heavy .810" at Muzzle 1:12 Twist Rate Threaded with 11/16 x 24 thread, includes black thread...

TC Encore ProHunter Barrel 26" Stnls Fluted 350 Legend Threaded TC Encore ProHunter barrels feature:  Finish Stainless Steel Length 26" Contour Heavy .810" at Muzzle 1:16 Twist Threaded with 11/16 x 24 thread, includes thread protector No Sights,...

Ruger 10/22 Rifle Performance Pak - Springs Extra Power Recoil Spring Extra Power Hammer Spring Extra Power Trigger Spring Reduced Power Sear Spring Upgrading your Ruger 10/22 with these springs will improve let-off and overall functioning. It is...

YoDave Marlin 336 Reduced Power Finger Lever Spring No more fighting to click the lever into the fire position on Marlin Model 1894, 1895, 336 and 444 models! Polishing the mating surfaces of the lever and the plunger as well as the addition of a reduced...

 YoDave Marlin 39A Reduced Power Hammer Spring Reduce the force required to open your lever and cycle the bolt by reducing the force of the spring acting on the hammer without sacrificing consistent primer strikes and ignition, ease of cycling is...

YoDave CZ-455 Trigger Shim and Spring KitImproves the Trigger Pull of CZ-455, CZ-452 and BRNO Model 2, 4, and 5 Rifles This kit removes the creep and lightens the trigger pull weight by the use of shims and new springs. Kit includes 4 shims and 4 new...

YoDave CZ-457 Plus 10 Striker Spring Achieve more reliable ignition when you install this 10% stronger striker spring in your CZ-457 bolt. Refer to your CZ-457 manual for disassembly and replacement of the factory spring. If you are experiencing...

Springs for the JARD CZ-457 Trigger Replacement springs to change pull weight on the JARD CZ-457 Trigger. These are the springs shown in the JARD CZ-457 Trigger instruction manual. You can swap in a stronger or a lighter spring to change the pull weight...

YoDave CZ-457 Trigger Spring Kit  With this kit, you can reduce the CZ-457 trigger pull to approximately half of what the factory spring will adjust down to. Used in conjunction with the sear adjustment screw located on the front of the trigger...

Remington 870 Trigger Tune Spring Kit This kit comprises of both a replacement hammer spring as well as five different trigger springs ranging in pull weight from 1.25lb to 5lb. The hammer spring is made from stainless steel, and the trigger springs are...

T/C Contender G2 Locking Bolt Set (2 Pieces)  Spring loaded barrel locking bolt set for Original Contender/SSK-50 and G2 Contender. Installs under spring tension into the barrel underlug and locks the barrel into battery when the action is closed...

MDT AICS Short Action Magazine fits 6GT - 10 Rounds - Economical polymer detachable magazine with polymer follower, this mag fits short action AICS compatible rifles and stocks. Polymer MDT External Box Magazines fit MDT Chassis systems especially well...