Shop by Model

Barrel Shims fit T/CR22 and Ruger 10/22 Barrels- Our Barrel Shims for the Thompson Center T/CR22 Rifle allow you to mount ANY Ruger 10/22 compatible replacement barrel onto your T/CR22* Just slip the shims onto the barrel shank. Mount the shank into your...

AR15 Tungsten Buffer Weights 3-Pack- It's easy to fine tune your bolt speed for optimum performance and reliability using our Tungsten Buffer Weights. Your AR15 recoil buffer has three STEEL weights inside. You simply replace the steel weights with EABCO...

Blue TC Encore Accuracy Barrels® by EABCO17 Remington Fireball 1:9, Standard Model, Match Grade BarrelTC Encore Accuracy Barrels® fit the TC Encore and Pro Hunter frames. Manufactured by E. Arthur Brown Company with special attention to detail,...

Blue TC Encore Accuracy Barrels® by EABCO308 Winchester 1:12, Standard Model, Match Grade BarrelTC Encore Accuracy Barrels® fit the TC Encore and Pro Hunter frames. The 1:12 rifling twist on this barrel is best suited to the 155 grain match...

Blue TC Encore Accuracy Barrels® by EABCO308 Winchester 1:8, Standard Model, Match Grade BarrelTC Encore Accuracy Barrels® fit the TC Encore and Pro Hunter frames. The 1:8 rifling twist on this barrel is best suited to heavy bullets (190-220gr)...

Blue TC Encore Accuracy Barrels® by EABCO308 Winchester, 1:10, Standard Model, Match Grade BarrelTC Encore Accuracy Barrels® fit the TC Encore and Pro Hunter frames. The 1:10 rifling twist on this barrel is best suited to most common 308 Win...

Blue TC Encore Accuracy Barrels® by EABCO6.5mm BRM 1:8, Standard Model, Match Grade Barrels Ready Made 6.5 BRM stands for 6.5 Bench Rest Magnum. It's a rimmed wildcat cartridge derived from an elongated and necked up 219 Donaldson Wasp (219 DW was...

Blue TC Encore Accuracy Barrels® by EABCO223 Remington 1:12, Standard Model, Match Grade Barrel TC Encore Accuracy Barrels® fit the TC Encore and Pro Hunter frames. Manufactured by E. Arthur Brown Company with special attention to detail,...

TC Encore Underlug Spring Roll Pin Kit- Replacements for the spring pins used in the underlug assembly of Thompson Center Encore and Pro Hunter barrels. Includes 6 large and 3 small pins to fit both TC factory barrels and EABCO Accuracy Barrels.

Thompson Center Encore/Pro HunterFiring Pin Bushing Screw Black (Qty 2)- Replacement for the factory screw that holds the firing pin bushing assembly in the frame. Sometimes these get rusty or lost and need replacing. This is a package of two... One...

Thompson Center Encore/Pro HunterFiring Pin Bushing Screw Stnls (Qty 2)- Replacement for the factory screw that holds the firing pin bushing assembly in the frame. Sometimes these get rusty or lost and need replacing. This is a package of two... One for...

Remington 700 Accuracy Barrel® 6.5 Creedmoor 1:8 Fits Remington 700 Series Rifles with No Modifications*. Shank Thread 1 1/16 -16 TPI Easy Installation and Headspacing with Remage Barrel Nut System (Included). 26" length, Tapered to .800" Muzzle,...

Savage Accuracy Barrel® 243 Winchester 1:8 Fits Savage 10/110 Series RiflesFits Savage Axis & Axis II Short and Long Action Rifles243 Win uses a 308 Win Bolt Face26" length, weight approx 4lbsVarmint weight tapered to just under .800" diameter at...

Savage Accuracy Barrel® 6mm Creedmoor 1:8 Fits Savage 10/110 Series RiflesFits Savage Axis & Axis II Short and Long Action Rifles6mm Creedmoor uses a 308 Win Bolt Face26" length, weight approx 4lbs 7.8ozVarmint weight tapered to just under .800"...

Picatinny Rail Scope Base for TC Contender/G2 Fits TC Contender and G2 barrels. This new mount fits TC Contender and G2 barrels, and provides milspec Picatinny mounting compatibility for your Original Contender/SSK-50 and/or G2 barrels. It fits the...

Stainless TC Encore Accuracy Barrels® by EABCO308 Winchester 1:10, Standard Model, Match Grade Barrels Ready MadeTC Encore Accuracy Barrels® fit the TC Encore and Pro Hunter frames. Manufactured by E. Arthur Brown Company with special attention...

Stainless TC Encore Accuracy Barrels® by EABCO6.5mm BRM, Standard Model, Match Grade Barrels Ready Made 6.5 BRM stands for 6.5 Bench Rest Magnum. It's a rimmed wildcat cartridge derived from an elongated and necked up 219 Donaldson Wasp (219 DW was...

Ruger Mk I, II, III HSS Ease-Of-Assembly Upgrade- The HSS (Hammer Strut Support) is a parts upgrade that greatly improves the ease of assembly for Ruger MK I,  II, and III pistols (It DOES NOT fit ANY 22/45, nor ANY Mk IV). It simply eliminates the...

EABCO Picatinny Scope Mount fits Savage Axis, Axis II, and EdgeA true Picatinny spec scope base for the Axis that's precision machined like a Benchrest mount. Based on our world famous, Keylock® design, this scope base is precision machined for...

AR10/308 Lower Parts Completion Kit   All the internal parts needed to complete a stripped lower AR10/308 receiver. DPMS compatible and all manufactured in the USA under strict quality control standards. Here's what's included: Front Pivot Pin ...