Shop by Model

Encore Locking Bolts by Thompson Center TC Factory replacement barrel locking bolts for Thompson Center Encore and Pro Hunter barrels. Every once in awhile the factory locking bolts crack or break for one reason or another. Customers send their barrels...

Encore Tool Steel Locking Bolts by EABCO- Precision machined tool steel barrel locking bolts for TC Encore and Pro Hunter barrels. 2014 was a worrisome time of shortages in the gun industry. We tooled up to machine these excellent locking bolts from tool...

Volquartsen Mk II, Mk III and 22/45 Accurizing Kit Black/BlackAlso Converts Mk III Pistols to Eliminate the Magazine Disconnect  Features a Black Extended Bolt Release and Black Trigger. Complete drop-in kit for the Ruger MKII and MKII 22/45 to...

Volthane Grips for Ruger the Ruger Mk III PistolFamous "Volthane" grips by Volquartsen fit the Ruger Mk III (will not fit the 22/45 models). Designed to position your hand exactly the same every time you grip the pistol, these grips are an aid to...

New Condition Used as Front base on:   Berreta Pintail ES 100 Slug Gun   Colt Sauer   Remington 700 & 78 L/A, 721, 725, 40X-L long actions, 700 & 78 S/A, 722, 40X-S, 725 Short Actions, 700ML, New Model 7 (4-holes), 673   Sauer...

LOCKER Hinge Pin for TC Encore and Pro Hunter  The Accuracy Locker Hinge Pin replaces your factory hinge pin with no modifications to your frame or barrel. It simply tightens into place so there is no rotation nor drifting from side to side. The...

Composite Forend for TC Encore Pro Hunter Rifle Barrels - Black Upgrade your TC Encore or Pro Hunter rifle with this versatile Composite Forend. Designed to adapt and flex to fit the barrel contours of 24", 26", and 28" barrels, this forend combines...

Ruger Mk II/III 22/45 Magazine Bumper Pads...Dump Your Empty Mag, Then "BUMP" One of These for Fast, Secure Reloads!   Made by economical molded plastic construction, the 22/45 magazine base bumper pad looks and functions just like the ones...

Hogue Full Length Aluminum Bed Block Stock for Savage RiflesThe Hogue "OverMolded" process is usually applied to a rigid internal skeleton but THIS stock takes it up a notch... Hogue has designed it around a full length aluminum bedding block... The...

The Remington ADL Tactical stock has a full length bedding block (see cutaway above), adjustable butt spacer system to adjust the length of pull, a rail and sliding swivel on bottom of forend to attach a bipod, and sling swivels on both sides. This stock...

Choate Tactical Riflestock for Remington 700 BDL   The Remington BDL Tactical stock has a full length bedding block (see cutaway above), adjustable butt spacer system to adjust the length of pull, a rail and sliding swivel on bottom of forend to...

Aero Precision Gen 2 Stripped AR15 LowerMachined to mil-spec dimensions, Aero Precision lowers work with standard AR15 components and ensure the highest quality with a correct component interface. Mil-Spec 7075-T6 aluminum forgings are CNC machined to...

Volquartsen TL Rear Sight for Ruger Mk II/Mk III/Mk IV, and LLV  Precision-machined to ensure accurate, repeatable click adjustments for windage and elevation. No fitting required, uses factory dovetail, locks in place with two set screws. Made of...

Hogue AR-15 Free Float Hand Guard 7'' w/Overmolded Rubber in Black or Ghillie Green- This is a 12.5'', Free Floating, precision machined, aluminum hand guard for your AR-15... It gives your AR-15 a a very high quality look and...

Volquartsen Target Hammer w/BushingFor Ruger® Mark II and Mark III- The MKII and MKIII Target Hammer is a complete drop-in item that is wire EDM-cut from hardened tool steel. The target hammer will not only reduce your trigger pull but will also...

Volquartsen SureStrike Firing Pin for Ruger MK I, II, III and IV (Including 22/45)   This SureStrike firing pin is designed to eliminate light strikes on the Ruger MK I, II, III and IV pistols (including 22/45). Machined .004" wider than...

Volquartsen Machined Disconnector for Ruger Mk II/III PistolsThis new Volquartsen disconnector is CNC Machined for a better fit and function over the stamped factory disconnector.  The additional width of this new disconnector gives increased...

Volquartsen 10/22 Stock Take-Down Screw  This is a precison Allen Head stock screw for your Ruger 10/22 Stock. The Allen head serves two purposes. First, it doesn't get buggered up like slotted head screws. Second, it fits torque wrenches so you can...

Hogue Overmolded Ruger 10/22 StockOverMolded Stocks are constructed by molding a super strong, rigid fiberglass reinforced skeleton or "insert" that precisely fits the guns' action. This rigid skeleton is then OverMolded with a durable but soft synthetic...

Ruger MKII/MKIII 22/45 Magazine Base Pad- Add some extra seating power to your Ruger Mark II & Mark III 22/45 magazines and customize the looks and handling of your gun at the same time! These 22/45 Magazine Bumpers add some length to your magazines...