Shop by Model

Rifle Basix Trigger L-3 for Remington Rifles (Silver Finish)Target Grade, Fits Remington 700, 40X, 7, and XR-100. Adjusts from 2 oz to 6 oz. Uses Factory Safety  Rifle Basix Remington triggers feature state of the art CNC machined billet T6-6061...

Rifle Basix Trigger LV-1 for Remington Rifles (Silver Finish)Varmint Grade, Fits Remington 700, 40X, 7, and XR-100.  Adjusts from 8 oz to 1.5 lbs. Uses Factory Safety  Rifle Basix Remington triggers feature state of the art CNC machined billet...

Rifle Basix Trigger L-1 for Remington Rifles (Silver Finish)Hunter Grade, Fits Remington 700, 40X, 7, and XR-100. Adjusts from 1.5 lbs to 3.5 lbs. Uses Factory Safety  Rifle Basix Remington triggers feature state of the art CNC machined...

Rifle Basix Trigger L-1 for Remington RiflesHunter Grade, Fits Remington 700, 40X, 7, and XR-100. Adjusts from 1.5 to 3.5 lbs. Uses Factory Safety  Rifle Basix Remington triggers feature state of the art CNC machined billet T6-6061...

The standard Encore forend screws (one long screw 0.785", one short screw 0.475") fit the Encore Rifle Forends (Not the Pro Hunter Rifle Forends). Note:  The standard Encore PRO HUNTER screws (two long screws) work on the Encore Pro Hunter (Flex...

Warne Maxima Scope Mounting Bases2-Piece and 1-Piece Steel Weaver Style Scope Bases  Warne Maxima Scope Mounting Bases are rigidly strong and perfectly aligned. They attached firmly with Torx screws, too. Specially made to fit Warne Maxima Rings,...

  This Breech Cleaning Brush is for cleaing up the threads around the removable breech plug. It’s long enough to reach into the threads in the barrel/receiver as well. For more Muzzle Loading Accessories Click Here!

Ruger Mark Series Ambidextrous Combat Low-Rise Holster. Shooters demanded it; this holster is designed to fit the Ruger® Mark Series (MK-I, MK-II, MK-III, MK-IV & 22/45) .22LR pistols with or without an optic or a suppressor. This...

  The TechSights 100 Set for Ruger 10/22 Rifles includes front and rear sights, which are specifically designed to be used together. This system provides a peep sight at the rear, National Match post at the front, and approximately 7.5" more ...

  For the .45 cal (10-32)This one really works! Threads onto a T/C ramrod and successfully removes stuck balls, bullets or shotgun wads from the bore. For more Muzzle Loading Accessories Click Here.

8-40 Plug Screws Blue (Pair) Plug screws fill in sight holes when you remove the sights. They screw in flush, look nice, and protect the threads in case you ever want to re-mount the sights. 8-40 thread Blue Plug Screws fit the  front sight holes...

M1 Carbine Style Ruger 10/22 Stock v. 2.0Now Includes Two Handguards... One for Each Sight System.Includes: Buttstock and barrel band with front sling swivelHandguard #1 with notch for Ruger factory 10/22 sightHandguard #2 with no notch for more...

  3 convenient muzzleloading ammo tubes. Use them as a handy way to carry spare sabots or Pyrodex pellets. These can also be cut or sized to accommodate your specific charge with sabot, converting each tube to a handy and speedy loading tube...

Dead Center BulletsMuzzleloaders are limited in velocity by the physics of the gun and the limitations of the components. The only place left to increase performance is through bullet design... Introducing the Dead Center Bullet. Dead Centers are...

  Solid brass body with steel jaws. This unique design allows the plunger spring to be locked in compressed position for easy loading, then released to keep #11 caps under tension for reliable dispensing. Holds up to 17 of the #11 Percussion...

  Small and light, this handy little short starter performs big. A solid aluminum shaft with a concave loading tip, attached to a rugged polymer palm saving knob, provides the hunter with a no-nonsense short starter which is all but...

  This Thompson Center Pyrodex powder spout makes it easier to pour Pyrodex powder directly from the container into a powder measure. This spout is for the Pyrodex Powder Bottles Only. For more Muzzleloading Accessories Click Here.

Shotgun Forend Screws fit Laminated TC Encore Forends  - All the hardware needed to attach our EABCO laminated 20ga and 12ga shotgun forend to your TC Encore or Pro Hunter Shotgun barrel. This hardware includes the two special screws and washers.-To...

Original TC Contender Keylock Scope Base- Weaver style, fits TC Contender and G2 Contender barrels. World famous for its toughness, the Keylock one-piece base is precision machined from solid aluminum billet (no cheapy play-doh factory extrusions). Take...

Original TC Contender Keylock Scope Base- Weaver style, fits TC Contender and G2 Contender barrels. World famous for its toughness, the Keylock one-piece base is precision machined from solid aluminum billet (no cheapy play-doh factory extrusions). Take...