TC Contender Super 14 Composite Forend Black Composite forend fits Original G1 Contender/SSK-50 with Super 14 bull barrels.  Length 7.25" and screw hole spacing approx. 3-1/8". TC's composite forends have been variously manufactured by Choate as...

Super Fast, Titanium Firing Pins for the Ruger 10/22®A faster Lock Time translates into more accurate shooting. These Titanium firing pins are 43% lighter than steel making them move faster and cutting Lock Time to a bare minimum. In addition, they...

PeepRib Peep Sights for Traditions Vortek and Pursuit Muzzleloaders  Our new PeepRib Aperture Sight for Traditions Vortek and Pursuit Muzzle Loaders combines a precision aperture sight with a scope mounting base. This Peeprib works with both...

Universal Swivel Stud Kit   Includes 1 machine screw swivel stud and 2 wood screw swivel studs. Usually the machine screw stud goes in the forend and is backed by the nut (included) and shortened to fit. The wood screw stud usually goes in the...

Original Military GradeKMW Pod-Loc™ Harris S Bipod Lever- The KMW Pod-Loc™ Tension Lever replaces the friction tensioning knob on Harris S Series Bipods. Adopted by military and police sniper units all over the world, the Pod-Loc™ has earned a solid...

   TC Contender G2 Composite Rifle Forend fits new G2 frame with non-tapered bull barrels. Also available in Walnut.  Screw hole spacing approx. 3 9/16"

Warne 20 MOA Tactical Scope Mounting BasesTrue Picatinny Mil-Spec Scope Mounting Bases are Tough and Accurate  Warne Maxima 20 MOA Tactical Scope Bases are all steel, rigid and accurate one piece scope mounting bases. These "20 MOA" bases have 20...

Rifle Basix Replacement Sear for Ruger Bolt Action CenterfireAdjusts from 14 oz - 2 lbs - Fits Early Bolt Action Ruger Centerfires with "Tang" Safety  Rifle Basix Ruger replacement sear produces a clean, crisp and light pull operation with...

EABCO Custom Reloading Dies   These are specially commissioned reloading die sets including a Custom Full Length Sizer/Decapper Die and an In-Line Bullet Seater Die. The sizing dies are custom made. Find more info on these cartridges, dies, and...

  Taco Hood for the Bond Front Sight used in handgun metallic silhouette competition. This is a 5" long tube that replaces the original short Bond hood-tube. Note: This is only the hood... It fits on your Bond Front Sight.

Hicks Ruger Number One Accurizer  Adjusts harmonics to achieve the accuracy sweet spot for your Ruger No.1. The main spring hanger bar that extends out under the barrel from the Ruger #1 receiver can be turned into a harmonic accuracy...

Ruger 10/22 Accuracy Firing PinWider Impact Surface Disrupts the Rim Less, Improves Accuracy Potential  Firing pin impact plays a critical role in the accuracy of rimfire cartridges. For example, the Russians developed a 2-pin system that dominated...

  TC Contender G2 Rubber Forend Fits Thompson Center G2 12-14" pistol barrels.  Screw hole spacing approx. 3 5/16"Forend Hardware Included

  The WGRS is an Aperture Sight that fits Thompson Center Arms Encore, Pro Hunter, Omega, and Impact. An aperture sight (aka peep sight), mounted as close to your eye as possible, removes a huge amount of aiming error by simply increasing the sight...

  These are the standard forend screws that fit Encore 24 and 26 inch barrels as well as Prohunter 28 inch barrels. New forends include these screws so, if you are ordering a new forend, you do not need to order these screws. We offer the ...

The Ruger 10/22® Competition Sear Kit lightens the trigger pull and smooths the trigger return. Hand stoned engagement surfaces. Includes a new sear, extra power sear spring, and two .004" trigger shims. This sear, when used with proper engagement of...

EABCO Custom Reloading Dies   These are specially commissioned reloading die sets including a Custom Full Length Sizer/Decapper Die and an In-Line Bullet Seater Die. The sizing dies are custom made. Find more info on these cartridges, dies, and...

The 10/22® Hammer Tune Kit produces a lighter trigger pull with a faster lock time. The sear engagement surfaces are precision ground and vapor honed. The kit includes a new hammer, extra power hammer spring, two .004" shims and a new trigger return...

Thompson Center Encore Muzzleloader Black Composite Forend TC Encore Muzzleloader Forend in Composite Black fits Thompson Center Arms Encore and Encore Pro Hunter muzzleloader barrels. Hardware not included, but available for additional cost.

This is a sling for cross shoulder carrying. An adjustable, quick release tightener loop slings your handgun at a comfortable level and the cross shoulder strap assures it won't slip off.