Thread Protector fits AR15 HBAR Contour 1/2 x 28 Stainless- Protect and beautify your HBAR muzzle threads with this beautiful knurled stainless thread protector. Standard 1/2 x 28 thread with a length of 5/8th inch and .740" diameter, it fits all EABCO...

Choate Short Bipod Adaptor/Swivel Stud  A shorter, lower bipod adapter that fits the forend rail of our Sniper, Varmint and Tactical stocks, lets you install a Harris bipod so that it tightens against the forend so there is not side to side movement...

Hybrid Match Ruger 10/22 BoltAccuracy Tuned and CNC Machined to Minimum TolerancesHybrid Match 10/22 Bolt combines the precision of CNC machining with accuracy enhancing parts and tune-up techniques. Drop-in fit... Just replace your bolt with this one...

Extended Bolt Release for Ruger MK II and Mk III (Not 22/45) Convert your Ruger Mk II or Mk III bolt release to a convenient thumb tab that works just the the bolt release on a 1911. Made by Majestic Arms. (Note: Does not fit 22/45 models).  E...

Shotgun Forend Screws fit Laminated TC Encore Forends  - All the hardware needed to attach our EABCO laminated 20ga and 12ga shotgun forend to your TC Encore or Pro Hunter Shotgun barrel. This hardware includes the two special screws and washers.-To...

Universal Swivel Stud Kit   Includes 1 machine screw swivel stud and 2 wood screw swivel studs. Usually the machine screw stud goes in the forend and is backed by the nut (included) and shortened to fit. The wood screw stud usually goes in the...

  These kits take away the mystery of fine tuning the Ruger 10/22® action and result in a superb trigger pull and super fast lock time. The 10/22® Hammer Tune Kit produces a lighter trigger pull with a faster lock time. The sear engagement...

  These are the standard forend screws that fit Encore 24 and 26 inch barrels as well as Prohunter 28 inch barrels. New forends include these screws so, if you are ordering a new forend, you do not need to order these screws. We offer the ...

Encore Muzzle Loader Forend HardwareFor Factory Walnut and EABCO Laminate Muzzleloader Forends   All the hardware needed to attach the Encore Laminate or Factory Walnut Muzzle Loader forend. Includes the leaf spring rod retainer with screw, and...

Ruger Mark IV Pistol Trigger Shims These trigger shims fit Ruger Mark I, II, III, IV & 22/45 Pistols. They install on the Left Side of the Trigger, between the Trigger and the #AN37 Bolt Stop Assembly. Installing a Shim here will stop the Trigger...

Choate Long Bipod Lug Sliding lug with swivel stud and locking wing nut fits the accessory rail on the bottom of the forend of Choate Sniper and Varmint Stock. Solid and handy swivel stud mounting point for Harris bipods. Wing nut allows you to unlock,...

YoDave CZ-457 Plus 10 Striker Spring Achieve more reliable ignition when you install this 10% stronger striker spring in your CZ-457 bolt. Refer to your CZ-457 manual for disassembly and replacement of the factory spring. If you are experiencing...

Springs for the JARD CZ-457 Trigger Replacement springs to change pull weight on the JARD CZ-457 Trigger. These are the springs shown in the JARD CZ-457 Trigger instruction manual. You can swap in a stronger or a lighter spring to change the pull weight...

Remington 870 Trigger Tune Spring Kit This kit comprises of both a replacement hammer spring as well as five different trigger springs ranging in pull weight from 1.25lb to 5lb. The hammer spring is made from stainless steel, and the trigger springs are...

T/C Encore and Pro Hunter Barrel Pivot Hinge Pin  This is the original factory hinge pin that pivots the barrel downward when you open and close your Encore or Pro Hunter action. Made from precision ground "drill rod" to fit closely for accuracy...

T/C Encore and Pro Hunter Barrel Pivot Hinge Pins  This is the original factory hinge pin that pivots the barrel downward when you open and close your Encore or Pro Hunter action. Made from precision ground "drill rod" to fit closely for accuracy...

SSK-50 Hammer Fits Original Contender and SSK-50 Receivers Fits SSK-50 firearm platforms May be compatible with TC Contender®, but due to their extreme dimensional variation, SSK cannot guarantee this. Please contact Smith & Wesson for...

Volquartsen HP Action Kit for 10/22  This kit consists of Volquartsen upgrade parts including: Target hammer (including shims and bushings), hammer spring, target disconnector, target sear and target trigger (including polished plunger and spring)...

Jard 3-Position Safety for Savage 10/110 RiflesThe JARD 3-Lever Triggers for Savage 10/110 require a 3 position safety. Check your rifle. If your Savage 10/110 series rifle has a 2-position safety, you will need to install one of these 3-position...