Subsonic 10/22 22LR Accuracy Barrel® Blue (.920)   Our EABCO Threaded 10/22 Accuracy Barrels® have threaded 1/2x28 muzzles to fit Muzzle Brakes and Suppressors. Custom thread protectors are included, order muzzle brakes separately. This...

Thread Protector fits Large Caliber 11/16 x 24 Blued (Black) Beautiful knurled blued thread protector in 11/16x24 thread with length of .625" and outside diameter of .820" Compatible with new TC ProHunter large caliber barrels (over 30 cal) like the 360...

Replacement screw for CVA Peeprib part #127-813.

Plug Screws for Sight Holes 6-48 Black, Two Screws E. Arthur Brown Company, Inc 4088 County Road 40 NW, Garfield, MN 56332

T/C Contender and G2 Barrel Pivot Hinge PinsThis barrel hinge pin is a direct replacement for the Thompson Center Contender and G2 Contender hinge pins.  Made from precision ground "drill rod" to fit closely for accuracy while allowing removal to...

T/C Encore and Pro Hunter Barrel Pivot Hinge PinsThis barrel hinge pin is a direct replacement for the Thompson Center Encore and Pro Hunter hinge pins.  Made from precision ground "drill rod" to fit closely for accuracy while allowing removal to...

T/C Contender 223 Remington Extractors are Tool Steel by EABCOThese 223 Remington extractors are used for TC Contender and G2 Contender barrels that are chambered for the 223 Remington cartridge. It also works with many other cartridges that have the...

Remington 700 Accuracy Recoil Lug - Bright Black  Replaces Remington recoil lug with a precision machined, parallel ground, oversized recoil lug for strength, alignment, rigidity, and accuracy. Remington factory recoil lugs aren't bad but they CAN...

Remington 700 Accuracy Recoil Lug - Matte Black  Replaces Remington recoil lug with a precision machined, parallel ground, oversized recoil lug for strength, alignment, rigidity, and accuracy. Remington factory recoil lugs aren't bad but they CAN be...

EABCO Remage Barrel Nut – Precision Fit for Remington 700 Pre-Fit Barrels The Remage Barrel Nut is at the heart of our re-barreling system for the Remington 700, allowing it to use a pre-fit barrel system without modifying the receiver. This nut...

TC Contender Barrel Dovetail Locks (Qty 2) by EABCO  Dovetail locks install into slots under G2 and Contender barrels and provide forend mounting points. Precision machined from tool steel by E. Arthur Brown Company, Inc and replaces TC...

Savage Accuracy Recoil Lug - Matte Black Replaces stamped Savage recoil lug with a precision machined, parallel ground, oversized recoil lug for strength, alignment, rigidity, and accuracy. Savage factory recoil lugs are stamped not machined. Their...

Savage Barrel Lock Nut Lock nut to secure barrel to receiver. Screw the barrel in to set headspace, then tighten the lock nut. Precision machined to close tolerances for optimal fit, alignment, and concentricity. This nut features squared grip notches to...

Hicks Ruger Number One Accurizer  Adjusts harmonics to achieve the accuracy sweet spot for your Ruger No.1. The main spring hanger bar that extends out under the barrel from the Ruger #1 receiver can be turned into a harmonic accuracy...

EABCO Ruger 10/22 Match Grade Accuracy Barrel - 18" Blued, Threaded Our EABCO Threaded 10/22® Accuracy Barrels® have threaded 1/2x28 muzzles to fit Muzzle Brakes and suppressors. Custom thread protectors are included... Order muzzle brakes...

8-40 Plug Screws Blue (Pair) Plug screws fill in sight holes when you remove the sights. They screw in flush, look nice, and protect the threads in case you ever want to re-mount the sights. 8-40 thread Blue Plug Screws fit the  front sight holes...