T/C Encore 44 Mag Extractors are Tool Steel by EABCO   The "44 Rem Mag" extractor is used for a few different TC Encore and Pro Hunter chamberings... Fits 44 Remington Magnum, 44 Special, 357/44 Baine and Davis, etc.,... to name...

T/C Encore 30-30 Extractors are Tool Steel by EABCO   The "30-30" extractor is used for several different TC Encore and Pro Hunter chamberings... Fits 30-30 Win, 7-30 Waters, 30 Herret, 6.5mm BRM, 30-30 Ackley Improved, 6mm BRM, 375 Win, 7mm...

T/C Encore 223 Extractors are Tool Steel by EABCO   The "223" extractor is used for several different TC Encore and Pro Hunter chamberings... Fits .223 Rem, 5.56 Nato, 300 Blackout, 221 Fireball, .222 Rem, 17 Fireball, 17 Mach IV, 7mm TCU, 204...

Picatinny Rail Scope Base for TC Contender/G2 Fits TC Contender and G2 barrels. This new mount provides milspec Picatinny mounting compatibility for your Original Contender/SSK-50 and/or G2 barrels. It fits the factory barrel 4-hole scope mount pattern...

Tactical Solutions 1022EMR-GMG Extended Magazine Release fits Ruger 10/22 Gun Metal Gray- Lever action extended magazine release for the Ruger 10/22 in Gun Metal Gray. Replaces factory magazine release and gives super leverage for easy magazine drop and...

Ruger Mk I, II, III HSS Ease-Of-Assembly Upgrade- The HSS (Hammer Strut Support) is a parts upgrade that greatly improves the ease of assembly for Ruger MK I,  II, and III pistols (It DOES NOT fit ANY 22/45, nor ANY Mk IV). It simply eliminates the...

Hogue Ruger MK IV Checkered Grips G10 - G-Mascus Black/Grey Laminate Pattern   Traditional styled checkering on G10 laminate grips for your Ruger Mk IV. The alternating black and gray laminate layers are patterned after "Damascus" steel and the...

Tandemkross "Victory" Trigger Replacement for Ruger Mk IV Silver Features:

Berger 30 Cal 185 Gr Juggernaut Target (100)   Target version of the 30 caliber 185 Juggernaut  bullet. Match grade accuracy in a bullet that's tough enough for combat.  Actually, ALL Berger Bullets are Match Grade, which means that they...

Berger 28407 7mm 180 Gr Hybrid Target (100)   Hybrid bullets are less sensitive to seating depth. The nose of the bullet combines secant and tangent (VLD) shapes for easy hand loading and very slippery long range performance. Construction of this...

Berger 26195 Tactical 6.5mm 130 Gr AR Hybrid OTM - Qty 100   The Tactical Open Tip Match (OTM) bullet line bridges the gap between functionality and the highest possible ballistic performance. These bullets are made with thicker jackets allowing...

Berger Hybrid  Target Bullets .264/6.5mm Caliber 140 grain   Hybrid designs are less sensitive to bullet seating depth. The bullet nose is a hybrid of tangent and secant (VLD) designs.   Actually, ALL Berger Bullets are...

Redding 280 Rem Imp. Deluxe 3-Die SetRedding 3-Die Reloading Set includes full length sizer/decapper die, Seater/Crimper Die and Neck Sizing Die. The full length die sets for bottleneck cases contain two dies. The full length (FL) resizing die contains...

EABCO Picatinny Scope Mount fits Savage Axis, Axis II, and EdgeA true Picatinny spec scope base for the Axis that's precision machined like a Benchrest mount. Based on our world famous, Keylock® design, this scope base is precision machined for...

AR10/308 Lower Parts Completion Kit   All the internal parts needed to complete a stripped lower AR10/308 receiver. DPMS compatible and all manufactured in the USA under strict quality control standards. Here's what's included: Front Pivot Pin ...

Bond Hooded Front Silhouette Sight by EABCO- Original Ralph Bond designed IHMSA Silhouette front sight manufactured by EABCO has a front post that's adjustable for width and height with a removable one inch tubular hood. This is the same sight that we...

AR15/ M16 Bolt Assembly, Nickel Boron Finish.  Replaces your factory bolt head assembly and fits into your Bolt Carrier. Compatible with all AR15/M16 milspecs but made better with superior materials and production processes. Our bolts are made with...

AR15 Commercial Buffer Tube Kit  Complete buffer tube parts kit for mounting M4 Commercial style collapsible butt stocks on an AR15 firearm. See the photos for comparison of Commercial vs. MilSpec styles... This kit fits butt stocks made to...

T/C Encore 300 Win Mag Extractors are Tool Steel by EABCO   The 300 Win Mag extractor is used for TC Encore and Pro Hunter barrels chambered in 300 Winchester Magnum and 7mm Remington Magnum. Our extractors are precision machined...

T/C Encore 35 Whelen Extractors are Tool Steel by EABCO   The 35 Whelen extractor is used for TC Encore and Pro Hunter barrels chambered in 35 Whelen. Our extractors are precision machined from tool steel billet. We...