Remington 700 Accuracy Barrel® 308 Winchester 1:12 Fits Remington 700 Series Rifles with No Modifications*. Shank Thread 1 1/16 -16 TPI Easy Installation and Headspacing with Remage Barrel Nut System (Included). 26" length, Tapered to .800" Muzzle,...

Long Range 6.5 Creedmoor AR Barrel 24"- This 6.5 Creedmoor chambered (DPMS style) 24 inch barrel is machined from 416R Stainless Steel with a bead blasted finish. Our 6.5 Creedmoor Barrels are airguaged match grade, ensuring the best in quality and...

EABCO Picatinny Scope Mount fits TC Encore Pro Hunter 12 Ga. BarrelsPrecision Machined from Aircraft Grade Aluminum BilletRigid and Straight to Enhance Accuracy PotentialMilspec Picatinny fits Weaver and Picatinny Rings and AccessoriesSuper Strong...

Thread Protector fits AR15 HBAR Contour 1/2 x 28 Stainless- Protect and beautify your HBAR muzzle threads with this beautiful knurled stainless thread protector. Standard 1/2 x 28 thread with a length of 5/8th inch and .740" diameter, it fits all EABCO...

Remington 700 Accuracy Recoil Lug - Bright Black  Replaces Remington recoil lug with a precision machined, parallel ground, oversized recoil lug for strength, alignment, rigidity, and accuracy. Remington factory recoil lugs aren't bad but they CAN...

Remington 700 Accuracy Recoil Lug - Matte Black  Replaces Remington recoil lug with a precision machined, parallel ground, oversized recoil lug for strength, alignment, rigidity, and accuracy. Remington factory recoil lugs aren't bad but they CAN be...

Remington 700 Accuracy Recoil Lug - Matte Stainless  Replaces Remington recoil lug with a precision machined, parallel ground, oversized recoil lug for strength, alignment, rigidity, and accuracy. Remington factory recoil lugs aren't bad but they...

Remington 700 Accuracy Recoil Lug - Bright Stainless  Replaces Remington recoil lug with a precision machined, parallel ground, oversized recoil lug for strength, alignment, rigidity, and accuracy. Remington factory recoil lugs aren't bad but they...

Stainless AR-15 Threaded 20" HBAR Barrel- Our Shaw Stainless Steel AR-15 HBAR Barrel is fully chambered and ready to install on an upper receiver. It features an 11° target crown for enhanced accuracy potential, and it's compatible with BOTH .223...

Remington 700 Accuracy Barrel® 6mm Creedmoor 1:8 Fits Remington 700 Series Rifles with No Modifications*. Shank Thread 1 1/16 -16 TPI Easy Installation and Headspacing with Remage Barrel Nut System (Included). 26" length, Tapered to .800" Muzzle,...

Thread Protector fits 350 Legend and 400 Legend AR15 HBAR Barrel - 350 Legend and 400 Legend AR15 Barrel has a unique muzzle thread so we had to make up these thread protectors especially to fit that barrel. Specially Threaded 9/16" x 24 tpi Length is...

Barrel Shims fit T/CR22 and Ruger 10/22 Barrels- Our Barrel Shims for the Thompson Center T/CR22 Rifle allow you to mount ANY Ruger 10/22 compatible replacement barrel onto your T/CR22* Just slip the shims onto the barrel shank. Mount the shank into your...

EABCO Remage Barrel Nut – Precision Fit for Remington 700 Pre-Fit Barrels The Remage Barrel Nut is at the heart of our re-barreling system for the Remington 700, allowing it to use a pre-fit barrel system without modifying the receiver. This nut...

T/C Encore 6.8 Rem SPC Extractors are Tool Steel by EABCO   The 6.8 Rem SPC extractor is used for TC Encore and Pro Hunter barrels chambered in 6.8 Rem SPC as well as 224 Valkyrie. Our extractors are precision machined from tool steel billet...

T/C Encore 450 Bushmaster Extractors are Tool Steel by EABCO   The 450 Bushmaster extractor is used for TC Encore and Pro Hunter barrels chambered in 450 Bushmaster. Our extractors are precision machined from tool steel billet. We...

AR15 Tungsten Buffer Weights 3-Pack- It's easy to fine tune your bolt speed for optimum performance and reliability using our Tungsten Buffer Weights. Your AR15 recoil buffer has three STEEL weights inside. You simply replace the steel weights with EABCO...

T/C Encore 45-70 Govt Extractors are Tool Steel by EABCO   Replacement extractors fit Thompson Center Encore/Pro Hunter barrels chambered for 45-70 Govt. The T/C factory extractors are molded and then machined. Our replacements are...

  The 7mm US is also known as 7mm Ultimate Silhouette. Famous for winning World Championships in IHMSA handgun metallic silhouette competition. Originally chambered in the BF Ultimate Silhouette Pistol (for which it is named). 7mm US is...

Blue TC Contender G2 Accuracy Barrel® by EABCO6.5mm BRM 1:8, Standard Model, Match Grade BarrelsTC Contender/SSK-50/G2 Accuracy Barrels® fit the TC Contender and G2 Contender frames. Manufactured by E. Arthur Brown Company with special...

Blue TC Contender G2 Accuracy Barrels® by EABCO35 Remington 1:14, Standard Model, Match Grade BarrelsTC Contender/SSK-50/G2 Accuracy Barrels® fit the TC Contender and G2 Contender frames. Manufactured by E. Arthur Brown Company with...