375 Winchester Brass for Reloading  Our 375 Win brass is made from brand new, unfired 30-30 brass. The headstamp reads "30-30 Win"*. As you probably know, original 375 Winchester headstamped brass is awfully hard to come by. We have developed a...

TC Encore PeepRib Picatinny Muzzleloader SightOur original PeepRib Aperture Sight for TC Encore, Pro Hunter, Triumph, Triumph Bone Collector, Impact and Omega combines a precision aperture sight with a scope mounting base. You can position a riflescope...

219 Donaldson Wasp Brass (Long Version - 50 pcs)  Custom, fully formed reloading brass for 219 Donaldson Wasp fits Model 97D Rifles and other guns chambered for the EABCO 219 Donaldson Wasp cartridge (long version). This is "wildcat" brass, formed...

PeepRib Peep Sights for Traditions Vortek and Pursuit Muzzleloaders  Our new PeepRib Aperture Sight for Traditions Vortek and Pursuit Muzzle Loaders combines a precision aperture sight with a scope mounting base. This Peeprib works with both...

  Custom, fully formed reloading brass for 6mm BRM fits Model 97D Rifles and other guns chambered for the EABCO 6mm BRM cartridge. This is "wildcat" brass, formed from virgin (unfired) 30-30 brass using our secret process that results in a...

300 BRM Brass (100) - Brass for 300 Bench Rest Magnum. All of our brass is made from 30-30 bulk brass. It is formed and trimmed to length. You should expect to full length size it and some minor trimming might be in order. 7-30 and .375 and the BRMs are...

Custom Formed 7-30 Waters Brass (50)Originally developed (by Ken Waters) as a faster and flatter shooting flat nose cartridge for Winchester lever action rifles, the 7-30 Waters has gained wider popularity among handloaders who shoot spitzer bullets in...

EABCO Custom Reloading Dies   These are specially commissioned reloading die sets including a Custom Full Length Sizer/Decapper Die and an In-Line Bullet Seater Die. The sizing dies are custom made. Find more info on these cartridges, dies, and...

  Taco Hood for the Bond Front Sight used in handgun metallic silhouette competition. This is a 5" long tube that replaces the original short Bond hood-tube. Note: This is only the hood... It fits on your Bond Front Sight.

Custom Loaded 6.5mm BRM Loaded Ammunition 140gr Hornady ELD Match Custom loaded 6.5mm BRM ammo, 20 rounds in a re-usable plastic carrying case. EABCO Custom 6.5mm BRM Brass, loaded with VihtaVuori powder, Benchrest Primer, and Amax match grade hunting...

Hicks Ruger Number One Accurizer  Adjusts harmonics to achieve the accuracy sweet spot for your Ruger No.1. The main spring hanger bar that extends out under the barrel from the Ruger #1 receiver can be turned into a harmonic accuracy...

  These are the standard forend screws that fit Encore 24 and 26 inch barrels as well as Prohunter 28 inch barrels. New forends include these screws so, if you are ordering a new forend, you do not need to order these screws. We offer the ...

Custom 7mm BRM Brass for Reloading (50). All of our brass is made from 30-30 bulk brass. It is formed and trimmed to length. You should expect to full length size it and some minor trimming might be in order. 7-30 and .375 and the BRMs are a little...

EABCO Custom Reloading Dies   These are specially commissioned reloading die sets including a Custom Full Length Sizer/Decapper Die and an In-Line Bullet Seater Die. The sizing dies are custom made. Find more info on these cartridges, dies, and...

Originally developed for the military, the OPS Muzzle Brake is the result of extensive research into muzzle gases and the effects of redirecting them for recoil reduction and accuracy enhancement. Excellent for big game as well as varmint cartridges (...

Encore Muzzle Loader Forend HardwareFor Factory Walnut and EABCO Laminate Muzzleloader Forends   All the hardware needed to attach the Encore Laminate or Factory Walnut Muzzle Loader forend. Includes the leaf spring rod retainer with screw, and...

TC Original/SSK-50 and G2 Pistol Forend for 14" Pistol barrels- Black. Rubber  Modified to fit both the Original & G2 Style Contender with non-tapered bull barrels. This one is for 12-14" barrels. Screw hole spacing approx. 3 1/8".  It is a...

EABCO Custom Reloading Dies   These are specially commissioned reloading die sets including a Custom Full Length Sizer/Decapper Die and an In-Line Bullet Seater Die. The sizing dies are custom made by Lee Precision. Find more info on these...

EABCO Ruger 10/22 Match Grade Accuracy Barrel - 18" Blued, Threaded Our EABCO Threaded 10/22® Accuracy Barrels® have threaded 1/2x28 muzzles to fit Muzzle Brakes and suppressors. Custom thread protectors are included... Order muzzle brakes...

Factory Blue EABCO Custom T/C Contender/SSK-50/G2 Accuracy Barrels® fit Thompson Center Contender and G2 frames. Made-to-order by E. Arthur Brown Company with precision barrel blanks, one at a time barrel making processes, and chambers with high...