E. Arthur Brown Co

An M1 Carbine Replica Canvas Gun Case that fits the Ruger 10/22, M1 Carbine, and other rifles of similar dimensions (fits rifles up to 36" long). Available in a  lined version that still looks authentic but gives better padding and...

TC Hot Shot Scope Mounting Base  Custom Weaver style Base for the Thompson Center Arms Hot Shot 22LR Mini Encore youth rifle. Fits any Weaver style scope mounting rings. Pictured above with a very reasonably priced Hawke Red Dot sight. Mount this...

Slip-Over Scope Mount for Ruger #1 Weaver Style Scope Base Slips Over Ruger No. 1 Rib  Our new "Slip-Over" Ruger #1 scope mount solves the problem of aligning an after market scope base on a contoured barrel... It uses the factory pre-aligned rib as...

Custom Formed 30 Herrett Brass - Originally developed by Steve Herrett of Herretts Grips, the 30 Herrett is one of the first bottleneck hunting cartridges designed specifically for the short barrels of single shot handguns. Very efficient and accurate. -...

Savage Tactical Varmint Scope Mount LA (Long Action) Silver  Our new Savage Tactical Varmint One Piece Scope Mount fits Savage Rifles with rounded front and rear receiver tops. Precision machined from bar stock, these mounts have several...

Savage Tactical Varmint Scope Mount LA (Long Action) Black  Our new Savage Tactical Varmint One Piece Scope Mount fits Savage Rifles with rounded front and rear receiver tops. Precision machined from bar stock, these mounts have several...

Savage Tactical Varmint Scope Mount SA (Short Action) SilverOur new Savage Tactical Varmint One Piece Scope Mount fits Savage Rifles with rounded front and rear receiver tops. Precision machined from bar stock, these mounts have several advantages...-...

ScopeRib III Sight System for Handgun Silhouette- Match grade, long range pistol sights combined with a scope mount so that you don't have to disturb the alignment of your sight system when using a scope to work up hand loads.- The ScopeRib III Sights...

Original S-Lever® Tensioner for S-Type Harris and Caldwell XLA Bipods - The Harris and Caldwell XLA "S" type bipods allow you to tilt or cant your rifle side to side to level your crosshairs. It's a great system. However, the friction tensioning...

The standard Encore forend screws (one long screw 0.785", one short screw 0.475") fit the Encore Rifle Forends (Not the Pro Hunter Rifle Forends). Note:  The standard Encore PRO HUNTER screws (two long screws) work on the Encore Pro Hunter (Flex...

PeepRib Aperture Sight for CVA Accura, Kodiak, Optima and Wolf Muzzle Loaders Fine tune your accuracy by combining a precision aperture sight with a Picatinny style scope mounting base. This Peeprib works with both old and new hole patterns. You can...

Drill and Tap for sight hole or forend screw hole. This charge is per hole.

  Our M1 Carbine Sling with Oiler is completely faithful to the early horseshoe type 1st issue slings. These dot the eye fastener, khaki web slings are exactly as per the original WWII issue. The oiler has the shaped dipper and gasket. For those who...

M1 Carbine Replica Ruger 10/22 Stock & Tribute Version 2.0 with Dual Handguards: The Ultimate Conversion Kit Transform your Ruger 10/22 into a tribute to the iconic M1 Carbine with this drop-in replica stock. Crafted from solid beech wood, this...

See Through Reflections and Glare!Polarized Filter for Mueller APV Scopes  A polarized lens filter that fits the Mueller APV riflescopes. This polarized lens screws onto the 40mm objective lens of your riflescope and reduces the effects of glare,...

Original TC Contender Scope Base Weaver style, fits TC Contender and G2 Contender barrels. World famous for its toughness, the EABCO one-piece base is precision machined from solid aluminum billet (no cheapy play-doh factory extrusions). Take note that...

Original TC Contender Scope BaseWeaver style, fits TC Contender, SSK-50, and G2 Contender barrels. World famous for its toughness, the EABCO one-piece base is precision machined from solid aluminum billet (no cheapy play-doh factory extrusions). Take...

Original TC Encore Scope Base Cross Slot Style, fits TC Encore and Pro Hunter barrels. World famous for its toughness, the EABCO one-piece base is precision machined from solid aluminum billet (no cheapy play-doh factory extrusions).  Take note that...

Accelerator is a pre-treat accelerant that cuts cleaning time in half. Sop your bore with it before applying Patch-Out or Wipe-Out and it will speed up the chemical reaction cleaning process. See more at our Wipe-Out Bore Foam Page.

Patch-Out is Wipe-Out Bore Foam in a non-foaming liquid concentrate. It removes copper fouling even faster and more effectively because it is concentrated. Wipe-Out™ Bore Foam is Famous for its ability to safely dissolve copper fouling from your...