E. Arthur Brown Co

Thompson Center Encore/Pro HunterFiring Pin Bushing Screw Stnls (Qty 2)- Replacement for the factory screw that holds the firing pin bushing assembly in the frame. Sometimes these get rusty or lost and need replacing. This is a package of two... One for...

T/C Encore 460 S&W Mag ExtractorsPrecision Machined Tool Steel by EABCO   This "460 S&W Mag" extractor was engineered specifically for the 460 S&W cartridge... (it's not a 45 Colt/410 extractor). It fits 460 Smith and...

T/C Encore 44 Mag Extractors are Tool Steel by EABCO   The "44 Rem Mag" extractor is used for a few different TC Encore and Pro Hunter chamberings... Fits 44 Remington Magnum, 44 Special, 357/44 Baine and Davis, etc.,... to name...

T/C Encore 30-30 Extractors are Tool Steel by EABCO   The "30-30" extractor is used for several different TC Encore and Pro Hunter chamberings... Fits 30-30 Win, 7-30 Waters, 30 Herret, 6.5mm BRM, 30-30 Ackley Improved, 6mm BRM, 375 Win, 7mm...

T/C Encore 223 Extractors are Tool Steel by EABCO   The "223" extractor is used for several different TC Encore and Pro Hunter chamberings... Fits .223 Rem, 5.56 Nato, 300 Blackout, 221 Fireball, .222 Rem, 17 Fireball, 17 Mach IV, 7mm TCU, 204...

Remington 700 Accuracy Barrel® 6.5 Creedmoor 1:8 Fits Remington 700 Series Rifles with No Modifications*. Shank Thread 1 1/16 -16 TPI Easy Installation and Headspacing with Remage Barrel Nut System (Included). 26" length, Tapered to .800" Muzzle,...

Savage Accuracy Barrel® 243 Winchester 1:8 Fits Savage 10/110 Series RiflesFits Savage Axis & Axis II Short and Long Action Rifles243 Win uses a 308 Win Bolt Face26" length, weight approx 4lbsVarmint weight tapered to just under .800" diameter at...

Savage Accuracy Barrel® 6mm Creedmoor 1:8 Fits Savage 10/110 Series RiflesFits Savage Axis & Axis II Short and Long Action Rifles6mm Creedmoor uses a 308 Win Bolt Face26" length, weight approx 4lbs 7.8ozVarmint weight tapered to just under .800"...

Savage Accuracy Barrel® 223 Rem Wylde 1:726" length, approx 3lbsVarmint weight tapered to just under .800" diameter at muzzle223 Rem Wylde uses the 223 Remington Bolt FaceBore dimensions reamed consistent to airgauge within .0002 (2/10,000ths) of proper...

Picatinny Rail Scope Base for TC Contender/G2 Fits TC Contender and G2 barrels. This new mount provides milspec Picatinny mounting compatibility for your Original Contender/SSK-50 and/or G2 barrels. It fits the factory barrel 4-hole scope mount pattern...

Stainless TC Encore Accuracy Barrels® by EABCO260 Remington, Standard Model, Match Grade Barrels Ready MadeTC Encore Accuracy Barrels® fit the TC Encore and Pro Hunter frames. Manufactured by E. Arthur Brown Company with special attention to...

Stainless TC Encore Accuracy Barrels® by EABCO6.5mm BRM, Standard Model, Match Grade Barrels Ready MadeTC Encore Accuracy Barrels® fit the TC Encore and Pro Hunter frames. Manufactured by E. Arthur Brown Company with special attention to detail,...

Stainless TC Encore Accuracy Barrels® by EABCO204 Ruger, Standard Model, Match Grade Barrels Ready MadeTC Encore Accuracy Barrels® fit the TC Encore and Pro Hunter frames. Manufactured by E. Arthur Brown Company with special attention to detail,...

219 Donaldson Wasp Brass Sampler (5 pcs)Five pieces of our custom 219 Donaldson Wasp Brass that you can use to test fit and test load in your 219 Donaldson Wasp firearm. If it fits and works, you can then order the full bag of 50. Custom, fully formed...

Ruger Mk I, II, III HSS Ease-Of-Assembly Upgrade- The HSS (Hammer Strut Support) is a parts upgrade that greatly improves the ease of assembly for Ruger MK I,  II, and III pistols (It DOES NOT fit ANY 22/45, nor ANY Mk IV). It simply eliminates the...

Cut and Recrown 11 degree Target Crown Our expert gunsmiths take care and detail with each barrel they work with.  Accuracy is a priority, so proper cut and recrown requires proper centering and alignment. The crown of a barrel is is extremely...

EABCO Picatinny Scope Mount fits Savage Axis, Axis II, and EdgeA true Picatinny spec scope base for the Axis that's precision machined like a Benchrest mount. Based on our world famous, Keylock® design, this scope base is precision machined for...

T/C Encore 300 Win Mag Extractors are Tool Steel by EABCO   The 300 Win Mag extractor is used for TC Encore and Pro Hunter barrels chambered in 300 Winchester Magnum and 7mm Remington Magnum. Our extractors are precision machined...

T/C Encore 35 Whelen Extractors are Tool Steel by EABCO   The 35 Whelen extractor is used for TC Encore and Pro Hunter barrels chambered in 35 Whelen. Our extractors are precision machined from tool steel billet. We...

T/C Encore 6.5x284 Extractors are Tool Steel by EABCO   The 6.5x284 extractor is used for TC Encore and Pro Hunter barrels chambered in 6.5 x 284 Norma, .284 Winchester, and anything else based on .284 Winchester brass. Our...