E. Arthur Brown Co

Blue TC Encore Accuracy Barrels® by EABCO6.5mm BRM 1:8, Standard Model, Match Grade Barrels Ready Made 6.5 BRM stands for 6.5 Bench Rest Magnum. It's a rimmed wildcat cartridge derived from an elongated and necked up 219 Donaldson Wasp (219 DW was...

Blue TC Encore Accuracy Barrels® by EABCO223 Remington 1:12, Standard Model, Match Grade Barrel TC Encore Accuracy Barrels® fit the TC Encore and Pro Hunter frames. Manufactured by E. Arthur Brown Company with special attention to detail,...

TC Encore Underlug Spring Roll Pin Kit- Replacements for the spring pins used in the underlug assembly of Thompson Center Encore and Pro Hunter barrels. Includes 6 large and 3 small pins to fit both TC factory barrels and EABCO Accuracy Barrels.

Thompson Center Encore/Pro HunterFiring Pin Bushing Screw Black (Qty 2)- Replacement for the factory screw that holds the firing pin bushing assembly in the frame. Sometimes these get rusty or lost and need replacing. This is a package of two... One...

Thompson Center Encore/Pro HunterFiring Pin Bushing Screw Stnls (Qty 2)- Replacement for the factory screw that holds the firing pin bushing assembly in the frame. Sometimes these get rusty or lost and need replacing. This is a package of two... One for...

T/C Encore 460 S&W Mag ExtractorsPrecision Machined Tool Steel by EABCO   This "460 S&W Mag" extractor was engineered specifically for the 460 S&W cartridge... (it's not a 45 Colt/410 extractor). It fits 460 Smith and...

T/C Encore 44 Mag Extractors are Tool Steel by EABCO   The "44 Rem Mag" extractor is used for a few different TC Encore and Pro Hunter chamberings... Fits 44 Remington Magnum, 44 Special, 357/44 Baine and Davis, etc.,... to name...

T/C Encore 30-30 Extractors are Tool Steel by EABCO   The "30-30" extractor is used for several different TC Encore and Pro Hunter chamberings... Fits 30-30 Win, 7-30 Waters, 30 Herret, 6.5mm BRM, 30-30 Ackley Improved, 6mm BRM, 375 Win, 7mm...

T/C Encore 223 Extractors are Tool Steel by EABCO   The "223" extractor is used for several different TC Encore and Pro Hunter chamberings... Fits .223 Rem, 5.56 Nato, 300 Blackout, 221 Fireball, .222 Rem, 17 Fireball, 17 Mach IV, 7mm TCU, 204...

Savage Accuracy Barrel® 308 Winchester 1:12Bench Rest Competition Barrel - 1:12 Twist for 155 gr Match Bullets Fits Savage 10/110 Series Rifles Fits Savage Axis & Axis II Short and Long Action Rifles Shank Thread 1-1/16x20 TPI (small shank) 26"...

Savage Accuracy Barrel® 6.5-284 Norma 1:8 Fits Savage 10/110 Series RiflesFits Savage Axis & Axis II Short and Long Action Rifles Shank Thread 1-1/16x20 TPI (small shank) 6.5-284 Norma uses a 308 Win Bolt Face26" length, weight approx...

Savage Accuracy Barrel® 243 Winchester 1:8 Fits Savage 10/110 Series RiflesFits Savage Axis & Axis II Short and Long Action Rifles Shank Thread 1-1/16x20 TPI (small shank) 243 Win uses a 308 Win Bolt Face26" length, weight approx 4lbsVarmint weight...

Savage Accuracy Barrel® 6mm Creedmoor 1:8 Fits Savage 10/110 Series RiflesFits Savage Axis & Axis II Short and Long Action Rifles Shank Thread 1-1/16x20 TPI (small shank) 6mm Creedmoor uses a 308 Win Bolt Face26" length, weight approx 4lbs 7...

Savage Accuracy Barrel® 223 Rem Wylde 1:7 Fits Savage 10/110 Series Rifles Fits Savage Axis & Axis II Short and Long Action Rifles Shank Thread 1-1/16x20 TPI (small shank) 26" length, approx 3lbs Varmint weight tapered to just under .800"...

Picatinny Rail Scope Base for TC Contender (G1, G2, & SSK50) Fits TC Contender and G2 barrels. This new mount provides milspec Picatinny mounting compatibility for your Original Contender/SSK-50 and/or G2 barrels. It fits the factory barrel 4-hole...

6.5mm BRM Brass Sampler (5 pcs)Five pieces of our custom 6.5mm BRM Brass that you can use to test fit and test load in your 6.5mm BRM firearm. If it fits and works, you can then order the full bag of 50. Custom, fully formed reloading brass for 6.5mm BRM...

Stainless TC Encore Accuracy Barrels® by EABCO308 Winchester 1:10, Standard Model, Match Grade Barrels Ready MadeTC Encore Accuracy Barrels® fit the TC Encore and Pro Hunter frames. Manufactured by E. Arthur Brown Company with special attention...

Stainless TC Encore Accuracy Barrels® by EABCO6.5mm BRM, Standard Model, Match Grade Barrels Ready Made 6.5 BRM stands for 6.5 Bench Rest Magnum. It's a rimmed wildcat cartridge derived from an elongated and necked up 219 Donaldson Wasp (219 DW was...

219 Donaldson Wasp Brass Sampler (5 pcs)Five pieces of our custom 219 Donaldson Wasp Brass that you can use to test fit and test load in your 219 Donaldson Wasp firearm. If it fits and works, you can then order the full bag of 50. Custom, fully formed...

Ruger Mk I, II, III HSS Ease-Of-Assembly Upgrade- The HSS (Hammer Strut Support) is a parts upgrade that greatly improves the ease of assembly for Ruger MK I,  II, and III pistols (It DOES NOT fit ANY 22/45, nor ANY Mk IV). It simply eliminates the...