E. Arthur Brown Co

TC Encore PeepRib Picatinny Muzzleloader SightOur original PeepRib Aperture Sight for TC Encore, Pro Hunter, Triumph, Triumph Bone Collector, Impact and Omega combines a precision aperture sight with...

USP Bore Paste Gun Cleaner and Barrel Break-In Kit  USP Bore Paste is an abrasive paste that is softer than steel but harder than barrel fouling. It is great for removing carbon, lead, and copper...

219 Donaldson Wasp Brass (Long Version - 50 pcs)  Custom, fully formed reloading brass for 219 Donaldson Wasp fits Model 97D Rifles and other guns chambered for the EABCO 219 Donaldson Wasp...

PeepRib Peep Sights for Traditions Vortek and Pursuit Muzzleloaders  Our new PeepRib Aperture Sight for Traditions Vortek and Pursuit Muzzle Loaders combines a precision aperture sight with a scope...

  Custom, fully formed reloading brass for 6mm BRM fits Model 97D Rifles and other guns chambered for the EABCO 6mm BRM cartridge. This is "wildcat" brass, formed from virgin (unfired) 30-30 brass...

Universal Swivel Stud Kit   Includes 1 machine screw swivel stud and 2 wood screw swivel studs. Usually the machine screw stud goes in the forend and is backed by the nut (included) and shortened to...

Single Shot Followers for Popular Rifles WHY Use a Single Shot Magazine Follower? - For best accuracy potential, bullet seating depth should be dictated by the length of your chamber, not your...

Original Military GradeKMW Pod-Loc™ Harris S Bipod Lever- The KMW Pod-Loc™ Tension Lever replaces the friction tensioning knob on Harris S Series Bipods. Adopted by military and police sniper units...

300 BRM Brass (100) - Brass for 300 Bench Rest Magnum. All of our brass is made from 30-30 bulk brass. It is formed and trimmed to length. You should expect to full length size it and some minor...

Custom Formed 7-30 Waters Brass (50)Originally developed (by Ken Waters) as a faster and flatter shooting flat nose cartridge for Winchester lever action rifles, the 7-30 Waters has gained wider...

EABCO Custom Reloading Dies   These are specially commissioned reloading die sets including a Custom Full Length Sizer/Decapper Die and an In-Line Bullet Seater Die. The sizing dies are custom made...

  Taco Hood for the Bond Front Sight used in handgun metallic silhouette competition. This is a 5" long tube that replaces the original short Bond hood-tube. Note: This is only the hood... It fits on...

Custom Loaded 6.5mm BRM Loaded Ammunition 140gr Hornady ELD Match Custom loaded 6.5mm BRM ammo, 20 rounds in a re-usable plastic carrying case. EABCO Custom 6.5mm BRM Brass, loaded with VihtaVuori...

Hicks Ruger Number One Accurizer  Adjusts harmonics to achieve the accuracy sweet spot for your Ruger No.1. The main spring hanger bar that extends out under the barrel from the Ruger #1 receiver can...

Ruger 10/22 Accuracy Firing PinWider Impact Surface Disrupts the Rim Less, Improves Accuracy Potential  Firing pin impact plays a critical role in the accuracy of rimfire cartridges. For example, the...

  These are the standard forend screws that fit Encore 24 and 26 inch barrels as well as Prohunter 28 inch barrels. New forends include these screws so, if you are ordering a new forend, you do not...

EABCO Custom Reloading Dies   These are specially commissioned reloading die sets including a Custom Full Length Sizer/Decapper Die and an In-Line Bullet Seater Die. The sizing dies are custom made...

Originally developed for the military, the OPS Muzzle Brake is the result of extensive research into muzzle gases and the effects of redirecting them for recoil reduction and accuracy enhancement...

Encore Muzzle Loader Forend HardwareFor Factory Walnut and EABCO Laminate Muzzleloader Forends

Wipe-Out Bore Foam Gun Cleaner is different, but easy to use. Point the nozzle down the bore and squirt. The barrel instantly fills with expanding foam that penetrates every nook and cranny. Wait an...