E. Arthur Brown Co

Extended Eye Relief Scope Base for TC Contender/G2  Fits TC Contender and G2 barrels. This new mount extends forward to give longer eye relief when mount a riflescope on your Original Contender/SSK-50 and/or G2 barrels. It fits the factory barrel...

Savage Barrel Installation ServicesOur Skilled Gunsmiths can Headspace and Install Barrels... Channel ForendsWe'll set up your headspace for the best accuracy and reliable ammunition fit and function. Then we'll double check it with the best SAAMI spec...

Pro Hunter "FlexTech" Muzzle Loader Forend Screws and Washers The TC Factory Pro Hunter "FlexTech" forend for muzzle loaders has two screws of different length (2 washers also included). If you've lost one or both screws or washers, this kit supplies...

Custom Formed 6.5mm BRM Brass (50)- At long last we can once again offer 6.5 BRM brass custom formed from virgin 30-30 brass. This is the original brass that built the reputation of 6.5 Benchrest Magnum (6.5 BRM). - Economically Priced in Bags of 50...

$15 General Installation Charge for installing a #2 Harris Bipod Adaptor on a TC Composite Forend. Order the Adaptor separately and forend separately.

Custom Forend fits G1 and G2 Contender Carbine, Walnut, Bull Barrel- Modified G2 Style Walnut Bull Forend fits the Original Contender/SSK-50 Carbine Length with non-tapered (bull) barrels as well as the G2 Contender with non-tapered bull barrels. Screw...

TC Hot Shot Scope Mounting Base  Custom Weaver style Base for the Thompson Center Arms Hot Shot 22LR Mini Encore youth rifle. Fits any Weaver style scope mounting rings. Pictured above with a very reasonably priced Hawke Red Dot sight. Mount this...

Slip-Over Scope Mount for Ruger #1 Weaver Style Scope Base Slips Over Ruger No. 1 Rib  Our new "Slip-Over" Ruger #1 scope mount solves the problem of aligning an after market scope base on a contoured barrel... It uses the factory pre-aligned rib as...

Custom Formed 30 Herrett Brass- Originally developed by Steve Herrett of Herretts Grips, the 30 Herrett is one of the first bottleneck hunting cartridges designed specifically for the short barrels of single shot handguns. Very efficient and accurate. -...

Custom Modified Contender and G2 ForendModified G2 Style Composite Bull Forend fits the Original Contender/SSK-50 Carbine with non-tapered (bull) barrels as well as the G2 Contender with non-tapered bull barrels. Screw hole spacing approx. 3 9/16"...

Savage Tactical Varmint Scope Mount LA (Long Action) Silver  Our new Savage Tactical Varmint One Piece Scope Mount fits Savage Rifles with rounded front and rear receiver tops. Precision machined from bar stock, these mounts have several...

Savage Tactical Varmint Scope Mount LA (Long Action) Black  Our new Savage Tactical Varmint One Piece Scope Mount fits Savage Rifles with rounded front and rear receiver tops. Precision machined from bar stock, these mounts have several...

Savage Tactical Varmint Scope Mount SA (Short Action) SilverOur new Savage Tactical Varmint One Piece Scope Mount fits Savage Rifles with rounded front and rear receiver tops. Precision machined from bar stock, these mounts have several advantages...-...

ScopeRib III Sight System for Handgun Silhouette- Match grade, long range pistol sights combined with a scope mount so that you don't have to disturb the alignment of your sight system when using a scope to work up hand loads.- The ScopeRib III Sights...

Original S-Lever® Tensioner for S-Type Harris and Caldwell XLA Bipods - The Harris and Caldwell XLA "S" type bipods allow you to tilt or cant your rifle side to side to level your crosshairs. It's a great system. However, the friction tensioning...

Dummy M1 Carbine Mag Conversion for Ruger 10/22 MagsAuthentic M1 Carbine Style Base Glues Onto 10 Round 10/22 Magazine (Mag Not Included)- Give Your Ruger 10/22 a Classic Military M1 Carbine Style... These "Dummy" M1 Carbine Magazine conversions attach...

The standard Encore forend screws (one long screw 0.785", one short screw 0.475") fit the Encore Rifle Forends (Not the Pro Hunter Rifle Forends). Note:  The standard Encore PRO HUNTER screws (two long screws) work on the Encore Pro Hunter (Flex...

PeepRib Aperture Sight for CVA Accura, Kodiak, Optima and Wolf Muzzle Loaders Fine tune your accuracy by combining a precision aperture sight with a Picatinny style scope mounting base. This Peeprib works with both old and new hole patterns. You can...

Drill and Tap for sight hole or forend screw hole. This charge is per hole.

Shotgun Forend Screws fit Laminated TC Encore Forends  - All the hardware needed to attach our EABCO laminated 20ga and 12ga shotgun forend to your TC Encore or Pro Hunter Shotgun barrel. This hardware includes the two special screws and washers.-To...