Dead Center BulletsMuzzleloaders are limited in velocity by the physics of the gun and the limitations of the components. The only place left to increase performance is through bullet design... Introducing the Dead Center Bullet. Dead Centers are...

EABCO Firing Pin SPRING fits TC Encore Pro Hunter- Replacement for the Thompson Center factory firing pin spring (that sometimes breaks). Our EABCO brand spring is made from a little thicker spring stock to give better durability. Expansion power and...

TC Encore Pro Hunter EER Scope Base Precision machined Extended Eye Relief (EER) scope base for TC Encore, Pro Hunter, Omega, Triumph and Impact barrels. Standard 4-Screw mounting with option for FREE 6-Screw mounting. Super rigid, precisely straight...

Muzzle Thread Adapter 9/16-24 to 5/8-24 This adapter converts your 9/16-24 threaded muzzle to fit 5/8-24 threads. This allows you to use 5/8-24 muzzle devices on your 9/16-24 threaded muzzle. - CAUTION - Be sure that the bore of your muzzle device is...

Extended Eye Relief Scope Base for TC Contender/G2  Fits TC Contender and G2 barrels. This new mount extends forward to give longer eye relief when mount a riflescope on your Original Contender/SSK-50 and/or G2 barrels. It fits the factory barrel...

EABCO Forend Washers fit T/C Encore Pro Hunter- These are replacements for the tiny little Washer/Spacers under the screws on TC Encore and Pro Hunter forends. We had a devil of a time finding a source for them and they are expensive. Forend washers are...

Oversized Ruger 10/22 Bolt Handle Assembly This is a standard weight oversized bolt handle assembly for the Ruger 10/22 to be used when firing 22LR ammunition. Oversized handle is much easier to grip than factory handle and looks nicer...

Slip-Over Scope Mount for Ruger #1 Weaver Style Scope Base Slips Over Ruger No. 1 Rib  Our new "Slip-Over" Ruger #1 scope mount solves the problem of aligning an after market scope base on a contoured barrel... It uses the factory pre-aligned rib as...

An M1 Carbine Replica Canvas Gun Case that fits the Ruger 10/22, M1 Carbine, and other rifles of similar dimensions (fits rifles up to 36" long). Available in a  lined version that still looks authentic but gives better padding and...

TC Contender Barrel Dovetail Locks (Qty 2) by EABCO  Dovetail locks install into slots under G2 and Contender barrels and provide forend mounting points. Precision machined from tool steel by E. Arthur Brown Company, Inc and replaces TC...

Thread Protector fits AR15 HBAR Contour 1/2 x 28 Stainless- Protect and beautify your HBAR muzzle threads with this beautiful knurled stainless thread protector. Standard 1/2 x 28 thread with a length of 5/8th inch and .740" diameter, it fits all EABCO...

TC Encore Underlug Spring Roll Pin Kit- Replacements for the spring pins used in the underlug assembly of Thompson Center Encore and Pro Hunter barrels. Includes 6 large and 3 small pins to fit both TC factory barrels and EABCO Accuracy Barrels.

TC Contender Underlug Roll Pin Kit- Replacements for the roll pins used in the underlug assembly of Thompson Center Contender and G2 Contender barrels. Includes 6 large and 3 small pins to fit both TC factory barrels and EABCO Accuracy Barrels.

Oryx Full Length Forend ARCA Rail- Converts your Oryx chassis stock to mount on bipods, tripods, etc... with the ARCA rail system. Specially contoured to fit the forend taper and M-Lok slots for a perfect flat bottom with ARCA compatible dovetail style...

EABCO Picatinny Scope Mount fits TC Encore Pro Hunter 12 Ga. BarrelsPrecision Machined from Aircraft Grade Aluminum BilletRigid and Straight to Enhance Accuracy PotentialMilspec Picatinny fits Weaver and Picatinny Rings and AccessoriesSuper Strong...

Original Military GradeKMW Pod-Loc™ Harris S Bipod Lever- The KMW Pod-Loc™ Tension Lever replaces the friction tensioning knob on Harris S Series Bipods. Adopted by military and police sniper units all over the world, the Pod-Loc™ has earned a solid...

6-48 Plug Screws Stainless (pair) Plug screws fill in sight holes when you remove the sights. They screw in flush, look nice, and protect the threads in case you ever want to re-mount the sights. 6-48 thread Blue Plug Screws fit the most standard firearm...

TC Encore Pro Hunter Muzzleloader Front Sight .455 Green- Fiber Optic Ramp Style Front Sight fits the special 8-40 threads of the Encore Pro Hunter front sight mounting hole. .455" height measured from the top surface of the barrel to the top of the...

Encore Muzzle Loader Forend HardwareFor Factory Walnut and EABCO Laminate Muzzleloader Forends   All the hardware needed to attach the Encore Laminate or Factory Walnut Muzzle Loader forend. Includes the leaf spring rod retainer with screw, and...

SSK-50 RECEIVER, Flat-Sided The SSK-50 Receiver is the modern revival of the original Contender design, now produced with advanced materials and precision manufacturing. This flat-sided stainless steel receiver is compatible with TC G1/G2 barrels, grips,...