Parts and Tools

T/C Encore 450 Bushmaster Extractors are Tool Steel by EABCO   The 450 Bushmaster extractor is used for TC Encore and Pro Hunter barrels chambered in 450 Bushmaster. Our extractors are precision machined from tool steel billet. We...

T/C Encore 460 S&W Mag ExtractorsPrecision Machined Tool Steel by EABCO   This "460 S&W Mag" extractor was engineered specifically for the 460 S&W cartridge... (it's not a 45 Colt/410 extractor). It fits 460 Smith and...

T/C Encore 6.5x284 Extractors are Tool Steel by EABCO   The 6.5x284 extractor is used for TC Encore and Pro Hunter barrels chambered in 6.5 x 284 Norma, .284 Winchester, and anything else based on .284 Winchester brass. Our...

T/C Encore 6.8 Rem SPC Extractors are Tool Steel by EABCO   The 6.8 Rem SPC extractor is used for TC Encore and Pro Hunter barrels chambered in 6.8 Rem SPC as well as 224 Valkyrie. Our extractors are precision machined from tool steel billet...

T/C Encore Hornet Extractors are Tool Steel by EABCO   The "Hornet" extractor is used for several different TC Encore and Pro Hunter chamberings... 22 Hornet, 22 K-Hornet, 17 Hornet, 17 Ackley Hornet... Basically any cartridge that is...

T/C Encore PPC Extractors are Tool Steel by EABCO   The PPC extractor is used for TC Encore and Pro Hunter barrels chambered in 6mm PPC and 22 PPC. Our extractors are precision machined from tool steel billet. We...

T/C Encore and Pro Hunter Barrel Pivot Hinge Pin  This is the original factory hinge pin that pivots the barrel downward when you open and close your Encore or Pro Hunter action. Made from precision ground "drill rod" to fit closely for accuracy...

T/C Encore and Pro Hunter Barrel Pivot Hinge Pins  This is the original factory hinge pin that pivots the barrel downward when you open and close your Encore or Pro Hunter action. Made from precision ground "drill rod" to fit closely for accuracy...

The Titan Extended Magazine Release for Ruger® Mark IV™ 22/45™ is a simple, drop-in replacement for the smaller factory magazine release, and offers significantly more surface area and height to boost the consistency and speed of magazine...

AccuWasher Gen 2 Muzzle Device Alignment The AccuWasher® Gen 2 Muzzle Device Alignment System is the ultimate solution for precise and repeatable muzzle device alignment. Unlike traditional crush washers, this mono-shim system is precision...

ScopeRib III Sight System for Handgun SilhouetteReplacement hood for your ScopeRib III Sight System, used in handgun metallic silhouette competition. This is a 2.5" long tube, the same as that which comes with the ScopeRib III Sight System.  Note:...

ChamberMade Repairs .22LR Dry Fire Damage, Solves Feeding and Extraction Problems- When you "dry fire" a .22 rimfire pistol or rifle, the firing pin hits the edge of the chamber¹. This can actually cause a dent or "peen" in the edge of the chamber.....

Volquartsen Exact Edge Extractor for Remington 870 and 1100The Exact Edge Extractor is manufactured through an EDM process (not an inferior MIM process) to produce exacting tolerances. The new extractor will not lose its edge under impact like...

Harris Bipods #3 Adapter fits Remington 4, 74, 7400The #3 Bipod Adapter creates a solid swivel stud bipod mounting point on Remington semi-automatic rifles. Attaches at the end of the forend, replaces the forend screw. E. Arthur Brown Company, Inc4088...

Ruger 10/22® Extended Mag Latch Release - 90598This 10/22® Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading...

Volquartsen Extended Bolt Release fits Ruger Mark IV Black Slightly Longer and Wider... Makes Releasing the Bolt Easier! Fits Ruger MKIV (Not MKIV 22/45) Finding it too hard release the bolt on the MK IV? Our extended bolt release gives you...

Colt SA Revolver RP Shooters Pak This Shooter's Pak includes a Wolff reduced power mainspring, a reduced power sear/bolt spring (flat-type), extra power base pin spiring and stainless steel hand ejector spring. These kits offer great improvement in the...

Colt SAA Revolver RP Shooters Pak This Shooter's Pak includes a Wolff reduced power mainspring, a reduced power sear/bolt spring (wire-type), extra power base pin spiring and stainless steel hand ejector spring. These kits offer great improvement in the...

Ruger MKIV Frame Lug This lug is precision machined for improved fit. Slight variances to the factory lug (as shown with the yellow circle in the additional image) can cause unnecessary wear to the Mark IV upper as well as aftermarket uppers like the...